Moving electricity meter...
Moving electricity meter...
Author
Discussion

luca brazzi

Original Poster:

3,983 posts

296 months

Tuesday 15th April 2003
quotequote all
Looking to redesign the kitchen and put a big fridge thing in place of one of the cupboards that happens to house the electricity meter and fuse board.

Rang up our provider, and they quoted (without even doing a survey/inspection) £1,100 to move it a couple of feet.

Does anyone know if another provider/independant electrician is legally allowed to move it? Surely my provider isn't allowed to have a monopoly on this, and be able to charge what it likes because I can't go elsewhere. I'm assuming that the meter is their property. Any suggestions?

LB

nicholasblair

4,111 posts

315 months

Tuesday 15th April 2003
quotequote all
You can move the fuse board no problem but cabling into the house up to and including the meter is property of supplier I'm afraid and only they can touch it.

FourWheelDrift

92,398 posts

315 months

Tuesday 15th April 2003
quotequote all
I think the obvious thing is, if you move it they will never know. How many times has the person who's come to check your meter asked "where's your meter?"!!!!!

CraigAlsop

1,991 posts

299 months

Tuesday 15th April 2003
quotequote all
The problem is, I would imagine, that the cabling coming into the house is always live, so you would need to get the Electricity supplier to turn it off for a few hours.
This would lead to the question "Why?" from them, which probably shouldn't be answered "'Cos you're theiving gits"

incorrigible

13,668 posts

292 months

Tuesday 15th April 2003
quotequote all
Craig, they work on it while its live

Guess I wouldn't do it for less than a grand either

Steve, How far has it got to move? is there enough slack in the cable to the meter? If so you should be able to get a local spark to do it

gsxrblue

238 posts

297 months

Tuesday 15th April 2003
quotequote all
I had exactly the same problem recently, quote of upto 1000 but coundnt say until the had started work.

The meter has a seal on it somewhere and only the electricity board can break this.

My electrician wouldnt move it so I built a samll shelf/cupboard over the meter and fitted a slightly smaller fridge/freezer.

SpoonMan

1,085 posts

292 months

Tuesday 15th April 2003
quotequote all
Sorry, this has to be done through your electricity supplier. But that sort of money is unrealistic.

I've just had an ancient meter ripped out, a new overhead cable fed to the back of the house, and a new meter installed in an outbuilding. It cost £200 for the whole lot. I'm using Powergen, but this had to be done through IUS, a northern-only company.

I'd suggest giving Energy Watch a call. Saved me at least a couple of hundred quid.

tvradict

3,829 posts

305 months

Wednesday 16th April 2003
quotequote all
bit late on this one but, if the meter + board is on a piece of chipboard or other such item, why not move the entire board over a bit, no seals broken, and they will never know!

Just a thought...