Transaxles, which one?
Discussion
The HP is not the issue.
What torque is it putting out and at what revs?
The Ultima uses a Porsche G50 box as the main choice but unless your SBC is making its HP by revving to 8000 then I suspect it will have too much torque for a G50 and you will have to move into the exotic/costly Hewland territory.
Steve
What torque is it putting out and at what revs?
The Ultima uses a Porsche G50 box as the main choice but unless your SBC is making its HP by revving to 8000 then I suspect it will have too much torque for a G50 and you will have to move into the exotic/costly Hewland territory.
Steve
You may get away with a modded Porsche 930 Box, or some of their racing boxes, but really I think it will be a box from one of the specialists, especially if your planning to match the Torque figure to the BHP figure, prepare to pay.............
Edited by Joe T on Monday 26th February 22:26
My porsche box can take 800bhp but 'only' around 650ftlb relaiably which is why I am trying to get raise the power band on my engine.....
To get a box that can definatelly take that kind of power you need to go to something like what Brammo sells but it will not be a cheap option.
To get a box that can definatelly take that kind of power you need to go to something like what Brammo sells but it will not be a cheap option.
Edited by andygtt on Tuesday 27th February 09:47
Have a look at this, www.zf-q.com it may be able to be modded to take more.
Gassing Station | Kit Cars | Top of Page | What's New | My Stuff