Carpets. Possible To Dye In-Situ?
Discussion
I've been the re-carpeting route with my first Chimaera and know what it entails to do the job particularly those pesky bolts that hold on the rear roof section.
Which is why I'm wondering if it's at all possible to re-colour carpet without removing it?
My carpets aren't at all bad, just a bit faded on the turret tops around the seatbelt fixing points and the parcel shelf. I'd rather not go through all 'that' again if I can help it.
Ideas?
Which is why I'm wondering if it's at all possible to re-colour carpet without removing it?
My carpets aren't at all bad, just a bit faded on the turret tops around the seatbelt fixing points and the parcel shelf. I'd rather not go through all 'that' again if I can help it.
Ideas?
Hi,
I am also thinking the same thing. I found the following websites that do auto carpet dye, but just don't know how effective it would be and how hard it would be to apply. As a matter of interest does anyone know how much it roughly costs to have the carpets replaced professionally? thanks.
www.goestores.com/catalog.aspx?Merchant=detailking&DeptID=198128
www.customfinishes.com/Vinyl-Carpet-Dye.htm
www.jccarpet.com/dye/carpetdye.html
I am also thinking the same thing. I found the following websites that do auto carpet dye, but just don't know how effective it would be and how hard it would be to apply. As a matter of interest does anyone know how much it roughly costs to have the carpets replaced professionally? thanks.
www.goestores.com/catalog.aspx?Merchant=detailking&DeptID=198128
www.customfinishes.com/Vinyl-Carpet-Dye.htm
www.jccarpet.com/dye/carpetdye.html
I was quoted £350 last year which was a bargain when you think that Coverdale rip you off for that for a set you have to fit! BTW How come a Chimaera set from them is £300+ but an MGB or 911 are £100 -£150 ;(
Not had it done yet as still toying with changing the whole interior colours. The company involved are used to TVR's as the indi I bought mine from uses them.
Mail me if you are interested & I'll try to dig out the info.
Not had it done yet as still toying with changing the whole interior colours. The company involved are used to TVR's as the indi I bought mine from uses them.
Mail me if you are interested & I'll try to dig out the info.
VHT`s excellent spray dye from USAutomotive: colour fast, hard wearing and their medium blue was as close a match to the dark blue carpets in my Griff as I`d hope to find. As with any spray, it will get everywhere you don`t want it so mask VERY well and don`t breathe the fumes!
https://www.usautomotive.co.uk/store/scrip
https://www.usautomotive.co.uk/store/scrip
optim8 said:
Hi,
I am also thinking the same thing. I found the following websites that do auto carpet dye, but just don't know how effective it would be and how hard it would be to apply. As a matter of interest does anyone know how much it roughly costs to have the carpets replaced professionally? thanks.
www.goestores.com/catalog.aspx?Merchant=detailking&DeptID=198128
www.customfinishes.com/Vinyl-Carpet-Dye.htm
www.jccarpet.com/dye/carpetdye.html
I am also thinking the same thing. I found the following websites that do auto carpet dye, but just don't know how effective it would be and how hard it would be to apply. As a matter of interest does anyone know how much it roughly costs to have the carpets replaced professionally? thanks.
www.goestores.com/catalog.aspx?Merchant=detailking&DeptID=198128
www.customfinishes.com/Vinyl-Carpet-Dye.htm
www.jccarpet.com/dye/carpetdye.html
Trim Tec in Dudley Port quoted me £350 for re-carpeting my Chim
www.trim-tec.co.uk/
its funny you should ask this because i have just done my carpets today with brill results ,i have dark blue carpets ,and dont laugh just airbrushed them with the closest match ,which was renovo roof dye.
the finish after two coats is new carpets, i also cleaned with thinners and 00 grade wire wool all the interior[ not the leather ]all the piping around carpets its like a show car now
the finish after two coats is new carpets, i also cleaned with thinners and 00 grade wire wool all the interior[ not the leather ]all the piping around carpets its like a show car now
Flintstone said:
I've been the re-carpeting route with my first Chimaera and know what it entails to do the job particularly those pesky bolts that hold on the rear roof section.
Which is why I'm wondering if it's at all possible to re-colour carpet without removing it?
My carpets aren't at all bad, just a bit faded on the turret tops around the seatbelt fixing points and the parcel shelf. I'd rather not go through all 'that' again if I can help it.
Ideas?
Which is why I'm wondering if it's at all possible to re-colour carpet without removing it?
My carpets aren't at all bad, just a bit faded on the turret tops around the seatbelt fixing points and the parcel shelf. I'd rather not go through all 'that' again if I can help it.
Ideas?
Forget about dying them - its easier to change them and is not as difficult or as costly as some would have you believe...
GV said:
Forget about dying them - its easier to change them and is not as difficult or as costly as some would have you believe...
Flintstone said:
I've been the re-carpeting route with my first Chimaera and know what it entails to do the job
Thanks everyone for the links and tips. I'll look into the various companies and materials.
I'm just doing my Griff I found these guys on Fleabay
http://cgi.ebay.co.uk/Car-Carpet-for-
they used to supply the factory with carpet, nice stuff and not wool which stinks if it gets wet, they also do all the TVR colours. I got 8 sq metres "to be on the safe side" ..... it took every scrap! having all the piping done at Preston Car trim, total cost,carpet and piping about £180
http://cgi.ebay.co.uk/Car-Carpet-for-
they used to supply the factory with carpet, nice stuff and not wool which stinks if it gets wet, they also do all the TVR colours. I got 8 sq metres "to be on the safe side" ..... it took every scrap! having all the piping done at Preston Car trim, total cost,carpet and piping about £180
Flintstone said:
So you used the old pieces as templates?
I assume you then sent the pieces away for piping. How long did you have to wait?
I have another idea (alcantara) but think I'll put that into another thread to avoid confusion.
I assume you then sent the pieces away for piping. How long did you have to wait?
I have another idea (alcantara) but think I'll put that into another thread to avoid confusion.
Yes I dropped all the bits of carpet off, he did them in just short of two weeks and for £50 top job as well.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff


