BOV and front clam alarm question
Discussion
Sorry if it has been done to death before, i did search before i posted.
1, I know noblemods do BOV or Dump to atmos valves, but is it possible to use a recirc DV like i already use on my *cough* Fiat. The noise is less prohibative and it is not wasting clod charged air by putting it back into the system. Anyone done this?
2, Is it possible to wire up the std alarm so it covers the front clam too (like taking a feed off the pop switch from the rear and linking it into a new one at the front), or does anyone know of a simple way to keep it secure. Bit concerned on security round here, lots of little turds with fiddle fingers. i have seen very small barrel locks used on computers before, wonder if they could be incorporated instead of the screw somehow? Any ideas/ miods you have done would be great. Thanks, Adam
1, I know noblemods do BOV or Dump to atmos valves, but is it possible to use a recirc DV like i already use on my *cough* Fiat. The noise is less prohibative and it is not wasting clod charged air by putting it back into the system. Anyone done this?
2, Is it possible to wire up the std alarm so it covers the front clam too (like taking a feed off the pop switch from the rear and linking it into a new one at the front), or does anyone know of a simple way to keep it secure. Bit concerned on security round here, lots of little turds with fiddle fingers. i have seen very small barrel locks used on computers before, wonder if they could be incorporated instead of the screw somehow? Any ideas/ miods you have done would be great. Thanks, Adam
Gassing Station | Noble | Top of Page | What's New | My Stuff