Is there a bodywork genius in the house ?
Discussion
We've recently repaired and repainted a '76 3000M (see profile), and just used normal cellulose paint. It's a solid colour though, so only needed a few coats of the same, but I understand it works fine in base and clear too, without baking. That would cover metallics too - what are you looking at repairing/respraying?
Tony
Tony
First spray of the (crap) bodywork my mate's FFR cobra replica (his current garage 1xChimera 1xRange Rover 1xhalf built cobra - detect a theme ?) he's imported it from the states and done all the filling and fairing of the (really crap) body but is now stuck. Ideally he'd like metallic blue. He knows how to spray but can't get a straight answer out of the manufacturers as to what to use (did I mention how crap the body is) - they haven't got much clue as to what's available here, despite having sold quite a few to the UK :grrrrr:
jaydee said: First spray of the (crap) bodywork my mate's FFR cobra replica (his current garage 1xChimera 1xRange Rover 1xhalf built cobra - detect a theme ?) he's imported it from the states and done all the filling and fairing of the (really crap) body but is now stuck. Ideally he'd like metallic blue. He knows how to spray but can't get a straight answer out of the manufacturers as to what to use (did I mention how crap the body is) - they haven't got much clue as to what's available here, despite having sold quite a few to the UK :grrrrr:
I'd advise a visit to his local auto-paint specialists. We have two near us, one in Luton, one in Hemel, both under the name of EuroColour. They've been great in advise and material sourcing while doing the M, so reckon someone similar (there must be a few about) would be able to help.
Does he have the full protective gear and booth etc? Two Pack = (Isocyanates + body) = not good at all without the right gear
Base and clear is the best bet for a metallic coat IMHO, but best to ask those locally who know.
If it's of any help, I can ask at my local place, and see what they say.
Cheers, Tony
jaydee said: Is base and clear a two-pack system ? I think he can spray cellulose, but I don't think he's got the gear for 2 pack. If your local place are able to give some advice that would be great![]()
>> Edited by jaydee on Tuesday 22 April 00:15
Base and clear, if I understand correctly, is just that - not a two pack as such (Isocyanates etc - previous comments stand!!!) but just a covering of base paint (the rough surface to make the metallic bit) followed by lacquer (for the clear and smooth surface). My mate full_chat recently did some touch ups on his Alfa with base and clear, and it's fine as far as not killing you goes. Drop me the details via the profile, and i'll have a word locally or get the details to you in the week.
Tony
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff


