Auto Electrics
Discussion
Get the Mini back tonight after its facelift (fantastic bodyshop, put it in Thursday, done Sunday!
).
Whilst I was in the process of doing the prep work, removing the headlights etc I found that a previous owner had at some point removed the indicator by snipping the wire rather than opening the bullet connector.
Now, when I put it all back together this evening I want to place some crimp terminals where the indicator wires were simply twisted together.
So, heres the question, what ampage? 5 or 15 for the terminal? I know it probably doesnt make much difference but I just wanted to be sure so thought I would ask at the font of all knowledge!
Matt.
). Whilst I was in the process of doing the prep work, removing the headlights etc I found that a previous owner had at some point removed the indicator by snipping the wire rather than opening the bullet connector.
Now, when I put it all back together this evening I want to place some crimp terminals where the indicator wires were simply twisted together.
So, heres the question, what ampage? 5 or 15 for the terminal? I know it probably doesnt make much difference but I just wanted to be sure so thought I would ask at the font of all knowledge!
Matt.
Matt,
Indicator bulbs are rated typically at 21W, therefore 21 divided by twelve gives you just under 2 amps draw. So a five would be safe, fifteen is a bit of overkill and might pass a short down the cable.
As an aside, an old Fiesta my missus once had had 5A terminals on the engine electric fan (which was protected by a 30A fuse). That took bloody ages to work out why it kept popping the fuse. In the end I bought a new sensor and renewed the terminals - the guys face in the spares shop when I told him that 5A blades were connecting my fan was a picture.
>> Edited by GregE240 on Tuesday 22 April 09:19
Indicator bulbs are rated typically at 21W, therefore 21 divided by twelve gives you just under 2 amps draw. So a five would be safe, fifteen is a bit of overkill and might pass a short down the cable.
As an aside, an old Fiesta my missus once had had 5A terminals on the engine electric fan (which was protected by a 30A fuse). That took bloody ages to work out why it kept popping the fuse. In the end I bought a new sensor and renewed the terminals - the guys face in the spares shop when I told him that 5A blades were connecting my fan was a picture.
>> Edited by GregE240 on Tuesday 22 April 09:19
Get yourself some crimp terminals from Screwfix instead of Halfords - they are MUCH cheaper.
www.screwfix.com/app/sfd/cat/pro.jsp?ts=99994&id=15848
www.screwfix.com/app/sfd/cat/pro.jsp?ts=99994&id=15848
Thanks chaps!
Unfortunately/fortunately I get the car back this evening so will be needing the crimping tool this evening so will just have to nip down to Dyas and get a cheap on in my lunch hour.
I cant wait!
*I'm such a child, drive a TVR every day and am on
to be getting a £500 mini back from the bodyshop!
Matt.
Unfortunately/fortunately I get the car back this evening so will be needing the crimping tool this evening so will just have to nip down to Dyas and get a cheap on in my lunch hour.
I cant wait!
*I'm such a child, drive a TVR every day and am on
to be getting a £500 mini back from the bodyshop! Matt.
Sorry to be a bit serious, but your lights are your life in a car....
Don't scrimp on the tools you need, get as good as you can afford and shield any connectors, even if just with tightly wound eleccy tape. Best to solder/shrinkwrap though really.
Its better than being stuck out on the moors on a freezing night with driving rain after your electrics die, cursing your 'enthusiasm' weeks before...
Mind you if the cars for a weekend good weather blaster, b
x to it, stick the wires together with garden twine and get out there in the sunshine man! 
Don't scrimp on the tools you need, get as good as you can afford and shield any connectors, even if just with tightly wound eleccy tape. Best to solder/shrinkwrap though really.
Its better than being stuck out on the moors on a freezing night with driving rain after your electrics die, cursing your 'enthusiasm' weeks before...
Mind you if the cars for a weekend good weather blaster, b
x to it, stick the wires together with garden twine and get out there in the sunshine man! 
deltaf said: And use the PROPER crimping pliers!!!lol they make a much better job than anything else!![]()
Ps. If ya wanna work out current draw etc use the V-I-R Triangle.
V
---
I | R
V=volts
I=current(amps)
R=Resistance in Ohms.
To Find watts.....V x A= W
Hope this helps.![]()
Oooh, you don't want to be doing that. You'd have to use maths and equations and stuff...
Indeed, I do take your points...
I'll get a draper crimper and some sheilded terminals and insulate over the top of them I think, dont want the indicators failing. But given the mess of insulation tape and slightly dodgy wiring that was there before I toook everything to bits the garden wire would be an improvement!
Luckily the headlight wiring is in good shape so when I fit the halogen conversions in they should be good for some time to come.
Matt.
I'll get a draper crimper and some sheilded terminals and insulate over the top of them I think, dont want the indicators failing. But given the mess of insulation tape and slightly dodgy wiring that was there before I toook everything to bits the garden wire would be an improvement!
Luckily the headlight wiring is in good shape so when I fit the halogen conversions in they should be good for some time to come.
Matt.
Oh god, i'm gonna sound like aright anorak now, but......
You might wanna think about adding in relays to your headlights if you car hasn't already got them (whats the age of the mini?) PO fitted them to my 70's MG and nuked the wiring and the switch.
I replaced all that, added relays and am now running 100/80 xenon bulbs in cibie headlights and they are daylight i can tell you!!!! Driving on the motorway last night my dip beams are comparable to the fish eye bubs that are on beemers now and the main beam are like searchlights (you can hear the relays power up when they come on, very cool!).
Relays remove the main current from the switch and in simpleton terms feeds it all to the light units....
If you need to i can point you to very good website telling you how to it, all you need is about 5metres of cable and two relays, sum total about <£15 and much cheaper than electrical fires...!
mode off (i could talk all day about this stuff cos i am a real saddo i'm a fraid
)
Good luck anyhoo!!!!
You might wanna think about adding in relays to your headlights if you car hasn't already got them (whats the age of the mini?) PO fitted them to my 70's MG and nuked the wiring and the switch.
I replaced all that, added relays and am now running 100/80 xenon bulbs in cibie headlights and they are daylight i can tell you!!!! Driving on the motorway last night my dip beams are comparable to the fish eye bubs that are on beemers now and the main beam are like searchlights (you can hear the relays power up when they come on, very cool!).
Relays remove the main current from the switch and in simpleton terms feeds it all to the light units....
If you need to i can point you to very good website telling you how to it, all you need is about 5metres of cable and two relays, sum total about <£15 and much cheaper than electrical fires...!
mode off (i could talk all day about this stuff cos i am a real saddo i'm a fraid
) Good luck anyhoo!!!!
Nah ya not m8! Its the correct way of doing it, as you rightly stated.
I rewired the lights on my old Audi Gt using 70A relays for a total wattage of 540 watts!!! I can tell you, they used to light things up for miles in front!!!! lmao. Shame it got written orf tho..
(numpty rammed me).
I rewired the lights on my old Audi Gt using 70A relays for a total wattage of 540 watts!!! I can tell you, they used to light things up for miles in front!!!! lmao. Shame it got written orf tho..
(numpty rammed me).
Ahhh you wouldn't have the latest mini world mag would you?? I saw those..... very nice!!
To be honest i couldn't tell you whether an 89F would have relays or not. It should do at that age, but with BL/Rover nothing is ever certain. Best thing to do is look first in haynes manual if you have one, then the (factory fitted) relays are usually with the fuses, occasionally under bonnet. they are little black cubes about 15x15x20mm and have four connectors....
To be honest i couldn't tell you whether an 89F would have relays or not. It should do at that age, but with BL/Rover nothing is ever certain. Best thing to do is look first in haynes manual if you have one, then the (factory fitted) relays are usually with the fuses, occasionally under bonnet. they are little black cubes about 15x15x20mm and have four connectors....
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff





