look what i have got

[splatspeed]

http://cgi.ebay.com/ebaymotors/ws/eBa

these have arrived for stage 2

its automotive porn

[GTWayne]

Don't tell me that you have bought a Camero now Sean?

[splatspeed]

no just the headers

[pb3]

Not exactly equal length primaries are they!

[steve_d]

pb3 said:

Not exactly equal length primaries are they!

Does that matter so much if running forced induction?

Steve

[splatspeed]

steve_d said:

pb3 said:

Not exactly equal length primaries are they!

Does that matter so much if running forced induction?

Steve

steve is right

and i dont care for 200 bucks i love them

[GTWayne]

pb3 said:

Not exactly equal length primaries are they!

Not so important on a SBC forced induction or otherwise, nice to have though and certainly not counter productive.

[chuntington101]

splatspeed what flanges do they have on them??? T3 or T4???

thanks Chris.

[crafty]

chuntington101 said:

splatspeed what flanges do they have on them??? T3 or T4???

thanks Chris.

Chris.... please lay off with the silly questions... you are hurting my brain.

Edited by crafty on Thursday 8th March 07:58

[splatspeed]

chuntington101 said:

splatspeed what flanges do they have on them??? T3 or T4???

thanks Chris.

says t/3 /4

but will need to measure before making a purchase

worth the risk for 200 bucks

looking at smaller turbos to increase overall power not just peak and make the car easier to drive as the torque curve is flatter rather than top end power like MR2 turbo compared to na pulls from 3 to 5.5 k pretty flat torque curve

still 4 branch without equal length is better than cast with turbo at one end like i have seen

i know the angle out of the block is a pretty tight turn but engineering is a compromise

anyway these are bought for stage 2

stage 1 is standard distributer and carb with standard exhausts

stage 2 is twin turbo fuel injected

[GTWayne]

chuntington101 said:

splatspeed what flanges do they have on them??? T3 or T4???

thanks Chris.

Chris! Good to see you back at the sharp end buddy. Take no notice of Crafty, who is he trying to kid making out that he has a brain and all that. I, on the other hand, have no brain what so ever so please, feel free to keep the inane no brain-er questions flooding in as always

[chuntington101]

splatspeed said:

chuntington101 said:

splatspeed what flanges do they have on them??? T3 or T4???

thanks Chris.

says t/3 /4

but will need to measure before making a purchase

worth the risk for 200 bucks

looking at smaller turbos to increase overall power not just peak and make the car easier to drive as the torque curve is flatter rather than top end power like MR2 turbo compared to na pulls from 3 to 5.5 k pretty flat torque curve

still 4 branch without equal length is better than cast with turbo at one end like i have seen

i know the angle out of the block is a pretty tight turn but engineering is a compromise

anyway these are bought for stage 2

stage 1 is standard distributer and carb with standard exhausts

stage 2 is twin turbo fuel injected

is it for a ultima or something else splat??

go idea to go smaller on the turbos mate. although you would be amazed at some of the stuff out these days. i hear twin Turbo techincs T66's with cermaic BB cores are amazing! some of the Corvette guys have them and the responce on a 346 LS1 is amazing. nearly as fast as T3/4 hybrids!

thanks Chris.

[chuntington101]

GTWayne said:

chuntington101 said:

splatspeed what flanges do they have on them??? T3 or T4???

thanks Chris.

Chris! Good to see you back at the sharp end buddy. Take no notice of Crafty, who is he trying to kid making out that he has a brain and all that. I, on the other hand, have no brain what so ever so please, feel free to keep the inane no brain-er questions flooding in as always

thanks GTWayne, and dont worry i have now got very used to the things that crafty has to say.

and you see im MUCH longer than he is. obviously he is at the age where he dones't care what people think about him!! (sorry crafty)

Chris.

OS have you seen the new nelson racing............(for you crafty! )

[m3desmo]

chuntington101 said:

GTWayne said:

chuntington101 said:

splatspeed what flanges do they have on them??? T3 or T4???

thanks Chris.

Chris! Good to see you back at the sharp end buddy. Take no notice of Crafty, who is he trying to kid making out that he has a brain and all that. I, on the other hand, have no brain what so ever so please, feel free to keep the inane no brain-er questions flooding in as always

thanks GTWayne, and dont worry i have now got very used to the things that crafty has to say.

and you see im MUCH longer than he is. obviously he is at the age where he dones't care what people think about him!! (sorry crafty)

Chris.

OS have you seen the new nelson racing............(for you crafty! )

You forgot to ask how much it is, Chris!!!!

[chuntington101]

m3desmo said:

You forgot to ask how much it is, Chris!!!!

OH NOOOOOOOOOO im loosing my touch! lol

Chris.

[v8 vum]

Obviously I appear not to have a clue....

How the devil do you upload piccys into a message guys?

I have looked everywhere......Blimey must be getting old!

Keith

[steve_d]

v8 vum said:

Obviously I appear not to have a clue....

How the devil do you upload piccys into a message guys?

I have looked everywhere......Blimey must be getting old!

Keith

Upload them to a free picture hosting site like imageshack.
Then copy the link to the pic and paste it into your reply.

If you hit quote on a reply that has a pic in it you will see what it looks like.

Steve

[GTWayne]

^ From one 'Oldie' to another 'ey Steve?

[crafty]

chuntington101 said:

and you see im MUCH longer than he is.

hahaha

Edited by crafty on Thursday 8th March 13:58

[v8 vum]

Heeeyyyy!

I might have grey hair and be well past my sell-by-date, but don't believe for one minute that I can't give y'all wipper-snappers a very good run fer yer money!!!



Keef