aprilia rs 125 2 stroke oil tank
aprilia rs 125 2 stroke oil tank
Author
Discussion

andy40

Original Poster:

5 posts

224 months

Sunday 11th March 2007
quotequote all
can anyone help, my son ran out of 2 stroke oil on his rs 125 can anyone tell me how to bleed the system or do i have to take it to an aprilia dealer
thanks

biker's nemesis

40,320 posts

225 months

Sunday 11th March 2007
quotequote all
Did the bike seize? If it did I'm afraid he will have damaged the bore, if not, fill the two stroke tank up (should be using fully synthetic) and remove the bleed screw, (on the pump)and twist the throttle. Wait and see if anythig comes out.

Whether it does or doesn't, put an egg cup full of two stroke oil into the fuel tank and shake the bike to mix it.

Start the bike and you should start to see oil running out of the bleed hole. Leave the engine running on tick over until you CANNOT SEE ANY AIR BUBBLES IN THE OIL running out of the bleed hole.

What area of the North East are you from. I recognise the name in your profile.

andy40

Original Poster:

5 posts

224 months

Monday 12th March 2007
quotequote all
a mate from work has started to strip it down it did seize looking up exhaust port it dose not look good.will let you know what i find and if any bits are req'd if anyone knows the cheapest place to get then thanks
i live in thirsk

andy40

Original Poster:

5 posts

224 months

Thursday 15th March 2007
quotequote all
hi needs new piston and barrel needs a rebore anyone know of anywhere to get this done for a decent price and a good job done thanks

r5gttgaz

7,897 posts

237 months

Thursday 15th March 2007
quotequote all
andy40 said:
hi needs new piston and barrel needs a rebore anyone know of anywhere to get this done for a decent price and a good job done thanks


Cannot rebore.

Google for Stan Stephens. There is a bleed screw on the oil pump.

biker's nemesis

40,320 posts

225 months

Thursday 15th March 2007
quotequote all
andy40 said:
hi needs new piston and barrel needs a rebore anyone know of anywhere to get this done for a decent price and a good job done thanks


I had my enduro bike, barrel re nickoselled at Bike sport 0191 2328970 £120, new piston £60.

That was three years ago.

Try bike shops local to you as they will know places,cheaper,nearer.

r5gttgaz

7,897 posts

237 months

Friday 16th March 2007
quotequote all
Use genuine parts only or better.