Whats your favourite tool?!?
Discussion
That's a tough one....
The angle grider has a brutal yet blissful appeal.. likewise the chainsaw. Nail guns are very cool, but you quickly run out of reasons to use one unless you're a hairy arsed builder.
Lawnmowers can be brilliant and there's nothing quite like mowing all your wife's herbs and bedding plants for catharsis after a steaming row..
For sheer usefulness and elegant design though, it has to be the B&D Quattro Cordless (also has a cool name..
)
Edit: Ah - got carried away there for a moment - forgot about non-power tools.. Torque Wrenches - the ones that click. Marvellous piece of kit.. you know where you are with a torque wrench.
>> Edited by CarZee (moderator) on Thursday 24th April 09:46
The angle grider has a brutal yet blissful appeal.. likewise the chainsaw. Nail guns are very cool, but you quickly run out of reasons to use one unless you're a hairy arsed builder.
Lawnmowers can be brilliant and there's nothing quite like mowing all your wife's herbs and bedding plants for catharsis after a steaming row..
For sheer usefulness and elegant design though, it has to be the B&D Quattro Cordless (also has a cool name..
) Edit: Ah - got carried away there for a moment - forgot about non-power tools.. Torque Wrenches - the ones that click. Marvellous piece of kit.. you know where you are with a torque wrench.
>> Edited by CarZee (moderator) on Thursday 24th April 09:46
I give this thread another 30 seconds before Mungo and Podie find it..
Back on topic, gadgets wise an ipaq, most handy.. Otherwise, set of electrical screwdrivers which are getting alot more use with the TVR than they used to with the old car..
Edited to add - 5 replies while I was typing mine.. I'm getting slow..
>> Edited by Psychobert on Thursday 24th April 09:46
Back on topic, gadgets wise an ipaq, most handy.. Otherwise, set of electrical screwdrivers which are getting alot more use with the TVR than they used to with the old car..
Edited to add - 5 replies while I was typing mine.. I'm getting slow..
>> Edited by Psychobert on Thursday 24th April 09:46
Easy, without doubt, no question.
My dremel!!!
Adjustable speed in RPM from 5 to 25 thousand rpm, digistal readout, a million and one uses. Small and compact, own carrying case
Ahhhh! Its bliss just gettiing it out the box!
I was looking for an excuse for years to buy one, managed to scrape the barrel in finding one (reason) now on my way to owning on of each attachment types!
Bliss!
My dremel!!!
Adjustable speed in RPM from 5 to 25 thousand rpm, digistal readout, a million and one uses. Small and compact, own carrying case
Ahhhh! Its bliss just gettiing it out the box! I was looking for an excuse for years to buy one, managed to scrape the barrel in finding one (reason) now on my way to owning on of each attachment types!
Bliss!

shnozz said:
mrs fish said: I can't say![]()
and there was psychobert thinking it would be Podie/Mungo et al perverting this thread
I thought Mrs Fish was such a quiet little soul, so it never crossed my mind..
Mungo I see got his bit out to start drilling holes. Any mention of trains and tunnels or polishing his bonnet and I'll send for the men in white coats..
Until the weekend I think it was a hammer
But now I quite like cement mixers
You can't beat anything powered by a two stroke (chainsaws, grinders, strimmers) etc but the top accolade must go to something either strikingly simple (hammer or axe etc) or ludicrously complicated (surface grinder, spark eroder, tig welder etc)
On reflection, my vote goes for the brutal steam hammer
But now I quite like cement mixers
You can't beat anything powered by a two stroke (chainsaws, grinders, strimmers) etc but the top accolade must go to something either strikingly simple (hammer or axe etc) or ludicrously complicated (surface grinder, spark eroder, tig welder etc)
On reflection, my vote goes for the brutal steam hammer

mine would be the 3/4 inch drive socket bar that i got to fix the brakes on my old beetle. had to do the axle bolt up to about 250 lbs/ft!!* it has a simple yet elegat brutality about it, and i have yet to find a bolt or nut that it can't undo.
*a hilarious process that involved a 32mm socket, said socket bar and a 1m scafold pole. you simply jump on the end of the pole till it stops moving!!!
*a hilarious process that involved a 32mm socket, said socket bar and a 1m scafold pole. you simply jump on the end of the pole till it stops moving!!!
incorrigible said: Until the weekend I think it was a hammer
But now I quite like cement mixers![]()
You can't beat anything powered by a two stroke (chainsaws, grinders, strimmers) etc but the top accolade must go to something either strikingly simple (hammer or axe etc) or ludicrously complicated (surface grinder, spark eroder, tig welder etc)
On reflection, my vote goes for the brutal steam hammer
I can just imagine you experiencing cement mixer joy!
But what on gods green earth is a spark eroder?
Matt.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff





