Hardware wizards - Graphics card crashes PC ?
Discussion
Calling all hardware wizards
Following my recent post about graphics cards, I've bought a Radeon 9000 PCI 64mb to go in my Compaq P933 small form PC (PCI because the PC has no AGP slot)
Installed it last night, the thing works fine with standard VGA drivers, but as soon as I install the proper drivers, it locks Windows up at load time (note, I uninstalled the old Voodoo drivers first)
I initially tried to install it on my existing Win2k setup. It gets about 2/3 of the way through the load of Windows (until the progress bar is 2/3 of the way along) and then locks utterly solid (i.e. power off at wall time). Loading in safe mode works, of course.
Now, I've tried all sorts. I've loaded the latest ROMPac from the Compaq site, no difference. I've even in desperation scratched the machine, and loaded a virgin copy of Win2k onto a formatted partition - same effect. Ditto with Windows XP, and even Windows 98. Load vanilla Windows, load graphics drivers, PC wont boot.
The only support the manufacturer offers is on their website at www.powercolor.com.tw but this site just times out for me.
Any thoughts before I contact dabs.com and return the card ?!? Thanks !!
Following my recent post about graphics cards, I've bought a Radeon 9000 PCI 64mb to go in my Compaq P933 small form PC (PCI because the PC has no AGP slot)
Installed it last night, the thing works fine with standard VGA drivers, but as soon as I install the proper drivers, it locks Windows up at load time (note, I uninstalled the old Voodoo drivers first)
I initially tried to install it on my existing Win2k setup. It gets about 2/3 of the way through the load of Windows (until the progress bar is 2/3 of the way along) and then locks utterly solid (i.e. power off at wall time). Loading in safe mode works, of course.
Now, I've tried all sorts. I've loaded the latest ROMPac from the Compaq site, no difference. I've even in desperation scratched the machine, and loaded a virgin copy of Win2k onto a formatted partition - same effect. Ditto with Windows XP, and even Windows 98. Load vanilla Windows, load graphics drivers, PC wont boot.
The only support the manufacturer offers is on their website at www.powercolor.com.tw but this site just times out for me.
Any thoughts before I contact dabs.com and return the card ?!? Thanks !!
Go out to the garage, get your largest hammer, remove the side panel on the PC, take three steps back, launch yourself at PC swinging hammer from above head height, smash the motherboard into pieces small enough to fit through mousehole, laugh manically. Go to shop and buy new PC. (Ensure you disconnect PC from mains before carrying out this "fix"). This may not be the answer you are looking for but I gaurentee it will releive that pent up anger and frustration you are feeling at the moment!!















There's 3 PCI slots, I'd just put it in the same slot as the Voodoo3. Have just tried it in another slot, no difference. There are no other PCI cards in place.
Just off to the ATI site to get another driver ... not sure which one I want though as it doesn't seem to list the 9000 (Catalyst Radeon 3.1 ??)
Cheers
Just off to the ATI site to get another driver ... not sure which one I want though as it doesn't seem to list the 9000 (Catalyst Radeon 3.1 ??)
Cheers
tuffer said: Go out to the garage, get your largest hammer, remove the side panel on the PC, take three steps back, launch yourself at PC swinging hammer from above head height, smash the motherboard into pieces small enough to fit through mousehole, laugh manically. Go to shop and buy new PC. (Ensure you disconnect PC from mains before carrying out this "fix"). This may not be the answer you are looking for but I gaurentee it will releive that pent up anger and frustration you are feeling at the moment!!
tuffer said: Go out to the garage, get your largest hammer, remove the side panel on the PC, take three steps back, launch yourself at PC swinging hammer from above head height, smash the motherboard into pieces small enough to fit through mousehole, laugh manically. Go to shop and buy new PC. (Ensure you disconnect PC from mains before carrying out this "fix"). This may not be the answer you are looking for but I gaurentee it will releive that pent up anger and frustration you are feeling at the moment!!
Having tried this method I can say it works. Although I didn't waste time removing the side panel. It removed itself with first blow of the 14lb hammer






Had a similar problem with mine when i bought a new graphics card.
Turned out to conflicting with the sound card, so replaced that with a sound blaster "live" card.
Problem fixed, no more troubles!.
You can check to see if theres any conflicts, but i cant bloody remember how!!arrrrrggghhhhhhh
Turned out to conflicting with the sound card, so replaced that with a sound blaster "live" card.
Problem fixed, no more troubles!.
You can check to see if theres any conflicts, but i cant bloody remember how!!arrrrrggghhhhhhh
tvradict said: Right click my comuter - properties - device manager (in ME, similar in 2K) any problems are flagged up with a Yellow Circle with a Black "!" in it!
That would be OK if it would get past the boot stage!!! Unfortunatly it seems that with the graphics card in place windows will not even boot.
luca brazzi said: Haven't read through all the posts....but I understand that ATI Radeon cards really like to be installed with a fresh install of windows. They really hate it when they're installed after having other graphics chipsets in before (especially nvidia).
LB
Have tried it with a completely fresh install of Win2k, WinXP and Win98se. Am currently installing Win2k again to a freshly formatted disk for the 4th time ...
Having almost every variant of Windows over the years I have found that if you change any fundamental piece of hardware that replies or complex driver support such as a graphics card, sound card, multimedia boards etc, the best option is to fdisk your system partition and reinstall windows from scratch.
Findign the registry entry or iffy DLL or VXD that's shafting your system is a tedious and time consuming process and it's often better to cut your losses and bite the fdisk and reinstall bullet.
Install expansion board based stuff one at a time after reinstall. Eg start and build the new windows up with just your VGA card and get that going, then shut down, install your modem and let windows detect and install that etc etc...
Prolly not what you wanted to hear, but as TV cop Hunter used to say - "Works for me...!"
Findign the registry entry or iffy DLL or VXD that's shafting your system is a tedious and time consuming process and it's often better to cut your losses and bite the fdisk and reinstall bullet.
Install expansion board based stuff one at a time after reinstall. Eg start and build the new windows up with just your VGA card and get that going, then shut down, install your modem and let windows detect and install that etc etc...
Prolly not what you wanted to hear, but as TV cop Hunter used to say - "Works for me...!"

Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff




