Starter Update
Starter Update
Author
Discussion

davidn

Original Poster:

1,028 posts

288 months

Thursday 22nd March 2007
quotequote all
Following on from my recent starter problems and search for a solution I ordered a Racemettle starter which arrived today. I'm pleasantly suprised at the differecne between this the Tilton and 2 other varieties I've tried which all came to nought.
It's a much smaller and lighter unit so it's a bit easier to fit and seems to be generally better engineered. Pics below show some of the differences.




Apart from the size the drive gear runs on a shaft sitting in a bearing on the front of the casing and is operated by a Bendix gear.

You can see the difference to the original Tilton unit

I've fitted it this afternoon and it's working fine, seems to spin more quickly than the others and starts the engine quickly which suggests to me it's more highly geared.
Anyway time will tell if it's a solution to the starter motor woes some of us have suffered but I really hope this solves mine.
David

simonsparrow

1,599 posts

291 months

Thursday 22nd March 2007
quotequote all
That looks good and better supported at the front. Did it cost much more?

byker28i

91,688 posts

246 months

Thursday 22nd March 2007
quotequote all
It looks good and seems well engineered. The claims are interesting, less weight, less power consumption, better cranking and smaller - easier to fit.

www.racemettleltd.co.uk/Docs/RAC422DS.pdf

Edited by byker28i on Thursday 22 March 22:39

davidn

Original Poster:

1,028 posts

288 months

Friday 23rd March 2007
quotequote all
simonsparrow said:
That looks good and better supported at the front. Did it cost much more?

Cost is £440 inc. on exchange else add £100 plus £10 p&p. Steve is the chap who builds them, very helpful give him a bell if you're interested.
David

TT Tim

4,168 posts

276 months

Friday 23rd March 2007
quotequote all
Go on, spill the beans - how much?

As there's no exchange, I'm expecting quite a high price.

Tim

davidn

Original Poster:

1,028 posts

288 months

Friday 23rd March 2007
quotequote all
davidn said:
simonsparrow said:
That looks good and better supported at the front. Did it cost much more?

Cost is £440 inc. on exchange else add £100 plus £10 p&p. Steve is the chap who builds them, very helpful give him a bell if you're interested.
David

Tim, look up.
David

RedTuscan

230 posts

275 months

Friday 23rd March 2007
quotequote all
And that is why TVR prices are on the floor. People say that they cost more to run than a Ferrari. They do! A Ferrari starter motor say for a 430 is only £230.00!

TT Tim

4,168 posts

276 months

Friday 23rd March 2007
quotequote all
davidn said:
davidn said:
simonsparrow said:
That looks good and better supported at the front. Did it cost much more?

Cost is £440 inc. on exchange else add £100 plus £10 p&p. Steve is the chap who builds them, very helpful give him a bell if you're interested.
David

Tim, look up.
David


D'oh

Tim

ancol

412 posts

253 months

Friday 23rd March 2007
quotequote all
a very good informative thread with very clear pics well done david looks a great starter but quite a lot of dollars

davidn

Original Poster:

1,028 posts

288 months

Friday 23rd March 2007
quotequote all
ancol said:
a very good informative thread with very clear pics well done david looks a great starter but quite a lot of dollars

Thanks mate I'm getting a bit preoccupied with starters now but I've stopped short of a ven diagram and pie chart, but yeah I agree it's a lot of dough but I've had enough of the tried and tested(?) batch of starters. I'm on no. 4 now so I'm hoping (but not expecting) it to be money well spent if it gives a few yeas of trouble free starting but mainly restores my confidence so I don't have to try and park on a steep hill every time I stop.
For the record I've tried to kill it by running it for a minute at a time with the fuel pump fuse out - which it passed and then 10 proper starts one after the other hot and cold - again no trouble. Probably broke something else doing it but heh you gotta find out somehow.
Fingers crossed as always.
David

byker28i

91,688 posts

246 months

Friday 23rd March 2007
quotequote all
Blimey - Top marks for bravery

Do they hand out George Crosses for Cerbera ownership?

davidn

Original Poster:

1,028 posts

288 months

Friday 23rd March 2007
quotequote all
byker28i said:
Blimey - Top marks for bravery

Do they hand out George Crosses for Cerbera ownership?

They do but there's currently a supply problem with the TVR George Cross but we'll get back to you in a couple of months when the parts are available.


Edited by davidn on Friday 23 March 20:31

ancol

412 posts

253 months

Friday 23rd March 2007
quotequote all
i suppose if the starter gives you a couple of years trouble free starting then it will be more cost effective than buying the other makes hope it proves so, but its one of of those again only time will tell but hopefully in a few years we will all be fitting them knowing they will perform admirably, i must say again though it certainly looks the dogs

Tangoed

924 posts

244 months

Saturday 24th March 2007
quotequote all
It looks well engineered but, ouch! Thats expensive. I hope it lasts and proves to be a winner.

ridds

8,372 posts

273 months

Saturday 24th March 2007
quotequote all
I'll stick to the Nissan one and have 3 over as many years if they break quick. :lol

davidn

Original Poster:

1,028 posts

288 months

Saturday 24th March 2007
quotequote all
ridds said:
I'll stick to the Nissan one and have 3 over as many years if they break quick. :lol

Yep, tried that but best I managed was 3 weeks with anyhting other than the original Tilton. I think it's more a case that for some lucky owners starter problems are a rarity so £400 plus is silly money for a replacement, but for others like me it's a continual problem and destroys your confidence in the car in which case £400 might seem like a bargain.
Anyway too early to tell if this is money well spent or just snake oil.
David

ridds

8,372 posts

273 months

Sunday 25th March 2007
quotequote all
Ahh, I'll bear that in mind then. laugh

Mine fails to engage at times when cold but improves greatly when warm which makes me think there's a bit of an alignment issue with it's fitting.