PC Problem URGENT Help please.
PC Problem URGENT Help please.
Author
Discussion

Big Al.

Original Poster:

69,336 posts

289 months

Sunday 27th April 2003
quotequote all
Friend of mine has had to re-format PC, seems to have wiped the hard drive.
Now when the PC is re-booted it just comes up with A: prompt....what to do next?

TYIA.

Alan420

5,618 posts

289 months

Sunday 27th April 2003
quotequote all
You need a boot disk, otherwise known as startup disk, system disk or recovery disk. It'll be a 3 1/2 inch floppy disk, normally supplied with a pre-assembled machine.

Once you've got one, stick it in the a drive and type;


dir/w

That will bring up a list of what's on the disk. Look for 'setup.exe' 'extract.exe' or something similar.

To run them just type the name (no need for the .exe bit).

The rest should be automated.


I should be on my computer for a while yet, email me with any extra questions...

Hope this helps.

>> Edited by Alan420 on Sunday 27th April 15:13

Byff

4,427 posts

292 months

Sunday 27th April 2003
quotequote all
whenever I've reformatted the hard drive, I normally set the bios to look for the CD Rom first (usually F: drive)

Then leave the Windows CDRom in the drive and it'll automatically reload a clean copy of windows.

Big Al.

Original Poster:

69,336 posts

289 months

Sunday 27th April 2003
quotequote all
Cheers Al & byff. Much appreciated. Just asked if there was a boot disc, now waiting for reply.

I'll keep you posted.

Ed to add byff.

>> Edited by Big Al. on Sunday 27th April 15:25

chris watton

22,552 posts

291 months

Sunday 27th April 2003
quotequote all
Also, if it's XP he's got, you can boot from the CD drive, but he will first have to make sure that the CD drive is selected for the first boot drive in the Bios menu. From there, you will be given options for the re-installation of the OS.
Hope that helps

Chris

Alan420

5,618 posts

289 months

Sunday 27th April 2003
quotequote all
In addition to the other comments, to set the BIOS to look for the CD you have to restart the computer, hold the delete key to enter the BIOS setup menu (bright blue usually, u can't miss it).

Once in there use the arrow keys to scroll through the various menus till you find the list of 'boot devices'. Use the Page up and Page down keys (above the arrow keys, on the right) to change them.

Big Al.

Original Poster:

69,336 posts

289 months

Sunday 27th April 2003
quotequote all
Al. followed your route i.e @ A: prompt typed in setup

and pressed enter screen now reads

CDR101:not ready reading drive E,ABORT RETRY FAIL?

I 'm a middle man and the person on the other end of the email is not too PC literate.

Thanks again all for inputs so far.

>> Edited by Big Al. on Sunday 27th April 19:10

miniman

30,238 posts

293 months

Sunday 27th April 2003
quotequote all
Sounds like the boot disk you are using does not have the device drivers on it for the CD-ROM drive. Type in "dir" and see if there is anything like "CDROM.SYS", and if "MSCDEX.EXE" is present.

If not, you won't be able to get at the CD-ROM using that disk. If they are there, try typing in:

"type autoexec.bat"

you should get a listing of loads of commands - one should look like

"mscdex.exe /d: cdrom01" or something.

Then try

"type config.sys"

you should get

"DEVICE=CDROM.SYS /d:CDROM01" or something.

If these are not there, it will not get the CD-ROM going. It'll have to be over to some other DOS-expert PHer to remind me exactly what syntax gets the CD going!

rjo

879 posts

302 months

Sunday 27th April 2003
quotequote all

Big Al. said: Al. followed your route i.e @ Arompt typed in setup

and pressed enter screen now reads

CDR101:not ready reading drive E,ABORT RETRY FAIL?

I 'm a middle man and the person on the other end of the email is not too PC literate.

Thanks again all for inputs so far.


Erm. That sounds like it is looking for a cd drive.
Now, does your mate have a operating system on a floppy or cd rom.
It should be a cd rom unless the pc is really old.
So, if he has a cd with windows on it, make sure there is no floppy in the computer, put the cd in and boot it.

Alan420

5,618 posts

289 months

Sunday 27th April 2003
quotequote all
I forgot to mention that you will need a windows CD in the CD drive when you type 'setup'.

If you've got one in there and you still get that message you'll need a different boot disk with Cd drivers on it, as discuissed above.

Big Al.

Original Poster:

69,336 posts

289 months

Sunday 27th April 2003
quotequote all
Hi Guy's, latest update. thanks to your inputs things are starting to respond.
I'll keep you posted.
Thanks again.