R1 injectors flow rate

[johnnymack]

Help please! Does anyone know the flow rate of the injectors in a standard Yamaha R1 (2002)? I'm building a locost running an R1 turbo but have come right up against a brick wall. Also, anybody got an ignition timing map for an R1 or similar? Save my life - let the wife get her car back in the garage!!

[Locoblade]

Haven't you already asked this question?

Edited by Locoblade on Tuesday 27th March 21:42

[johnnymack]

Yup! Senior moment. Thanks again for your help.

[Locoblade]

Knowing now what you're building, have you found the BEC section of Locostbuilders?

Also what are you using to control the ignition on your engine, if its a Power Commander then I might be able to help.

Chris

[johnnymack]

Yes. I've had a look at the BEC section. Lots of good stuff there. Thanks. Started with a Dutch system called KMS which proved totally useless for purpose, and am now flailing about with megasquirt. A pal is giving me his map from a Blackbird, so I may be able to fiddle on with that.

[Locoblade]

A friend of mine has a turbo busa running a megasquirt with 4 additional injectors. It works reasonably well with a wideband lambda sensor so it can map in real time on the move, but its still not running at 100% boost and he's run out of patience mapping himself so he's now going to swap to an Emerald and get it mapped properly by Dave Walker.

Let me know if you want me to pick his brains about anything.

Chris

[johnnymack]

Cheers for that.