EMP/scamera boffin wanted
Discussion
Was looking on some boffin sites last night thinking about scamera vulnerability to EMP. They are obviusly well screened from the rear but by neccessity holed to the front leaving a fair proportion of the gubbins open to radio waves.
For 'experimental purposes' how effective are EMP generators and could a novice solderer such as myself handle the construction without frying myself?
Also amount of funds required
(straw poll here, how pissed off am I sounding?)
For 'experimental purposes' how effective are EMP generators and could a novice solderer such as myself handle the construction without frying myself?
Also amount of funds required
(straw poll here, how pissed off am I sounding?)
I'm not sure frying the components is practical. Radio diminishes by the square of the distance so you'd need a heck of a pulse unless you attached something to the box - it's not something you could do drive-by, especially as you say there is a metal box in the way.
Digital cameras are very sensitive to infra red. There might be an approach of having some very, very bright IR lights on the back of the car and flooding the image. To the human eye they would just look like black lenses.
Digital cameras are very sensitive to infra red. There might be an approach of having some very, very bright IR lights on the back of the car and flooding the image. To the human eye they would just look like black lenses.
swilly said: alternatively you could use a small funsize nuclear device.
When 'set-off' it will produce EMP that will bring down airliners
slightly inappropriate use of a nodding smilie there I think.
The EMP weapon thing has been discussed here before, complete with links to "how to build at home" web sites. Have fun kids.
Microwave oven magnetron, inverter, suitable feed horn., 1.5kw continous operation, pulse peak if capacitor voltage dumped into it...many more....
Oh word of caution.....dont put yer head in front of it, or yer knackers, or indeed any part of you.....
And dont operate it without the horn, the feed horn you letch!! or youll fry your brain and get nasty big cataracts!!!
sotheresayselephantman.
>> Edited by deltaf on Wednesday 30th April 14:42
Oh word of caution.....dont put yer head in front of it, or yer knackers, or indeed any part of you.....
And dont operate it without the horn, the feed horn you letch!! or youll fry your brain and get nasty big cataracts!!!
sotheresayselephantman.
>> Edited by deltaf on Wednesday 30th April 14:42
Deltaf's suggestion sounds feasible. Trick is to know what frequency the camera uses for its radar. It will have a tuned antenna designed to pick up that frequency efficiently. Your job is to dump as much energy into that antenna as possible and blow up the first few amplifier stages inside the camera. Nice narrow frequency, narrow beam, very powerful microwave source is what you want.
Also good for heating pies at a distance.
Also good for heating pies at a distance.
Captain Muppet said:
swilly said: alternatively you could use a small funsize nuclear device.
When 'set-off' it will produce EMP that will bring down airliners
slightly inappropriate use of a nodding smilie there I think.
The 'airliner' comment was relating to the range of the device ie as far as the stratosphere. You will have to forgive me as my PC detector was damaged at birth when i was dropped on my head.

Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff






