Tuning
Author
Discussion

damo82

Original Poster:

3 posts

288 months

Wednesday 30th April 2003
quotequote all
What sort of things could I do to make my 1990 Rover Metro 1.4 go a bit faster?

planetdave

9,922 posts

284 months

Wednesday 30th April 2003
quotequote all
Always drive downhill

Aprisa

1,898 posts

289 months

Wednesday 30th April 2003
quotequote all
Damo82, have you got your Sarcasm filter switched on?

planetdave

9,922 posts

284 months

Wednesday 30th April 2003
quotequote all
Dependson how much wonga you chuck at it.
It is normal to start with the breathing (k&n, that sort of thing), a better exhaust,High pressure fuel pump, good sparks, chip, all the way up to bigger valves or forced induction

andyf007

863 posts

289 months

Wednesday 30th April 2003
quotequote all
Simply do a search on here for "Max Power".

I think you'll find that the following helps

leave foglights on
blue neon washer jets
bodykit
undercar lighting
tape up unused areas of windscreen
large exhaust and or trim
different wheels
decals
turn baseball cap around
any ICE over 500watts
colour of car

Andy

deltaf

6,806 posts

284 months

Wednesday 30th April 2003
quotequote all
Thats an easy one to answer.
Save up £35k and get a porsche or something nice like that. The Metro? Well you could take the roof off it and go push it round asdas?...

manek

2,978 posts

315 months

Wednesday 30th April 2003
quotequote all
Buy some spare WOMD (there must be some somewhere) and stick 'em up the Metro's exhaust pipe. Should do the trick.

dontlift

9,396 posts

289 months

Wednesday 30th April 2003
quotequote all
Tie it to the back of my Porsche.......

m-five

12,403 posts

315 months

Wednesday 30th April 2003
quotequote all
Put a 2.0l Maestro turbo lump in and get 200bhp out of it!

Get rid of the hide-elastic suspension and put some planks of wood in instead.

Won't make it handle any better though.

gnomesmith

2,458 posts

307 months

Wednesday 30th April 2003
quotequote all
You can fit a larger K series engine. I found a tuned 1.8 Metro to be very entertaining.

If you are serious about upgrading the Metro have a look at the Moto-Build Racing Website or give them a ring and chat to Darryl Davies, he is a keen racer and all round nice guy, I have dealt will them and can thoroughly recommend them for all things Rover from Max Power through to a full race Elise Conversions.

You have the basis of a great fun car in your Metro, don't let typical PH barbs put you off, we can't all afford to run junior supercars.

Fatboy

8,272 posts

303 months

Wednesday 30th April 2003
quotequote all
Or you could fit one of these and make some dosh on the drag race circuit

andyf007

863 posts

289 months

Wednesday 30th April 2003
quotequote all
On a serious note, will the Mk1 MG Metro Turbo engine fit? That was a scarey little car in it's day.

Andy

Superflid

2,254 posts

296 months

Wednesday 30th April 2003
quotequote all

Fatboy said: Or you could fit one of these and make some dosh on the drag race circuit



Technical details: The Trent is a three-shaft high bypass ratio engine. Fan diameter: Trent 900 at 116 inches (2.95 metres).

Thats gonna take some fitting!!!!!

gnomesmith

2,458 posts

307 months

Wednesday 30th April 2003
quotequote all

andyf007 said: On a serious note, will the Mk1 MG Metro Turbo engine fit? That was a scarey little car in it's day.

Andy


It could be made to fit with difficulty but it would not be as good as the K series fitted. If you really want to go bonkers and make life hard you can fit a Honda VTEC or even a 16V 2 Litre Vauxhall but K series transplants are easiest to do.

Oi_Oi_Savaloy

2,315 posts

291 months

Wednesday 30th April 2003
quotequote all
One word: Nitrous.

damo82

Original Poster:

3 posts

288 months

Wednesday 30th April 2003
quotequote all
Hi girls, where do i get all this stuff from?

Damo


planetdave said: Dependson how much wonga you chuck at it.
It is normal to start with the breathing (k&n, that sort of thing), a better exhaust,High pressure fuel pump, good sparks, chip, all the way up to bigger valves or forced induction


DanH

12,287 posts

291 months

Wednesday 30th April 2003
quotequote all

Damo, I doubt its sensible to even bother. You'll get reasonably negligable improvements, and its going to cost more than your car is worth.

Elises+Caterhams etc. all have k series engines so there is a lot of stuff out there, but its going to a couple of k to get anything even vaguely noticeable.

You'd be better of putting that money to a better car imho. Even if you up the engine power, you've got an expensive problem with shit suspension, tyres and brakes.

Graham

16,381 posts

315 months

Wednesday 30th April 2003
quotequote all

dontlift said: Tie it to the back of my Porsche.......


What the one with the buggered motor

Graham

16,381 posts

315 months

Wednesday 30th April 2003
quotequote all
Easy

Strip it right down and cut out the floor pan. take the remains of the shell to a chap i know and he 'll weld in a 6r4 cage. find either a 6r4 motor or a V8 and bolt to 6r4 mechanicals.

Sorted you will then have on damb quick metro....

cost is about 25-30k ish depending on spec...

Im still looking for an original one though..
Then i can tell everyone i drive a metro and ask them for a race

joospeed

4,473 posts

309 months

Wednesday 30th April 2003
quotequote all
I used to run an early A series Metro .. wonderful car.
Don't know if you read a recent cars and car conversions? .. metro was budget track car of the year! .. fab piccie of it overtaking a scoobie, and that's in std form.
I say go for it .. how quickly people laugh here when it fact you have the basis for a really fun and cheap rocket.
recently at donington there was a VERY fast metro with a 1.8VVC engine .. a little too quick at one point when the throttle stuck though..
If you've the got single point injection version there's not a gret deal you can do, going to throttle bdies and an emerald ECU would give useful urge and better driveability though. the multi point injection engine is much better in the first place, and good filter and exhaust (magnex do a belter) is the place to start.
early metros came with 4 pot calipers (mine did and that was a 1.0L to begin with!!) .. assuming the hubs are similar you could swap those over and get some grooved (not cross drilled ) discs.
saving weight is also a good move .. metros are blessed with a strong shell because of those very deep sills, but if your car is tired then seam welding might be sensible and reltively cheap if you have a MIG welder.
I would:
chuck out anything heavy .. underfelt / subwoofer (if you fitted one!) , get lightweight seats etc
Seam weld body
change exhaust and filter
substitute glass for perspex / polycarb
change front dampers
fit van rear hydro units (stiffer) and rear a/roll bar from early metro turbo
change front brakes
buy emerald and remap
good luck