Touching up...
Author
Discussion

mechsympathy

Original Poster:

58,948 posts

286 months

Thursday 1st May 2003
quotequote all
Some little **** has scratched/keyed my car, putting me in a particularly bad mood and causing me to use excessively foul language on the numpties I encountered on the way home. I can't even begin to express my contempt for the tw@, not that he'd understand anyway. :GRRRRRRRRR!!!:

Anyway, the upshot is a scratch on the driver side door, that is quite wide in places as the paint has peeled slightly. And I can see it in the wing mirror, which is even more infuriating.

The paint is metallic, so can i touch it up, or do I need to take it to a man wot can. And does anyone know of a decent paintshop in Bristol.

I have one thing to say: OhFFS.

shnozz

30,696 posts

302 months

Thursday 1st May 2003
quotequote all
sorry to hear this mate

but i did get quite excited by the thread title.

Davey Boy

13,394 posts

285 months

Thursday 1st May 2003
quotequote all
Complete Cnuts!

Big Al.

69,336 posts

289 months

Thursday 1st May 2003
quotequote all
Webbs Autos? are in the Bristol area.
Someone here may be able to comment.

mechsympathy

Original Poster:

58,948 posts

286 months

Friday 2nd May 2003
quotequote all
Returning to an old thread, on my way out last night (very nice meal, but too much port later on) noticed 4 other cars with key marks, none as bad as mine, and none rusty along the same pavement. Given that loads of people park down our road during the day and walk into work, I suspect there was a very self satisfied pikey scrote **** tw@t wandering around.

Ar$e

incorrigible

13,668 posts

292 months

Friday 2nd May 2003
quotequote all
How long can you wait? find the paint code and I'll blow it in for you next time you're up

What an enourmous pain in the arse

deltaf

6,806 posts

284 months

Friday 2nd May 2003
quotequote all
Dont even attempt to do it yourself mate.
Sorry to hera about this, its far too common an occurence these days, and like you, id give my left knacker for just 2 minutes alone with the little sh1tes.
Metallics are among some of the hardest to paints to repair, and especially if theres any pearlescent content to the paintjob.
Theyre usually layered as well, so best to go down the specialist route.
Once again sorry mate, i feel for ya.

mechsympathy

Original Poster:

58,948 posts

286 months

Friday 2nd May 2003
quotequote all

incorrigible said: How long can you wait? find the paint code and I'll blow it in for you next time you're up

What an enourmous pain in the arse


Cheers Ben, what do I need to do to keep the rust out til then?

incorrigible

13,668 posts

292 months

Friday 2nd May 2003
quotequote all
When you get the paint just dab it on with an artist brush (10p from woolworths)

Deltaf my car

Nightmare

5,279 posts

315 months

Friday 2nd May 2003
quotequote all

deltaf said:[/iMetallics are among some of the hardest to paints to repair

not true...dark metallics are some of the easiest...silver and other light colours are complete b*tches though.

Pearl - impossible to touch in

Good luck Incorrigable...nice job on that Chim!!

frostie

428 posts

306 months

Friday 2nd May 2003
quotequote all
Try "Chips-Away".

They are excellent and recommended by the RAC. They can do quite large areas if you get one of the guys who does commercial as well as domestic work and probably won't cost much more than about £100 ( depending on size ). I have used them in the past and the quality of work is very high - added to which they come to your house to do it.

Mark

>> Edited by frostie on Friday 2nd May 18:19

deltaf

6,806 posts

284 months

Friday 2nd May 2003
quotequote all
I stand corrected (had my know-it-all head on.. ).
Incorrigible, nice job!!

outlaw

1,893 posts

297 months

Saturday 3rd May 2003
quotequote all
with out seeing it hard to say.

if it aint deep it could just be tuched up and copounded and buffed.

if it is deep It can be blended but most bodyshops cant/dont want to try it.

If its clearcoated its best to fix base and recoat the whole panel in clear.



>> Edited by outlaw on Saturday 3rd May 02:37