BoLOCs to Break Pads!!
Discussion
Well, I've finally killed off my brake pads, which are now softer than Jade Goody's head, and have a fishy smelling set of Mintex 1144s to go on, but:
1) I have no facilities to change the pads
2) I have little technical ability either.
So which bored BoLOC wants to earn some beer tokens helping me replace them (jack and knowledge of how to do it essential).
I am around all week, so please advise availabilty and beer preference below....
Cheers BoLOCs!!
1) I have no facilities to change the pads
2) I have little technical ability either.
So which bored BoLOC wants to earn some beer tokens helping me replace them (jack and knowledge of how to do it essential).
I am around all week, so please advise availabilty and beer preference below....
Cheers BoLOCs!!
To change brake pads, you need minimal tools:
1) Jack
2) Spanner for wheelnuts (17 goes on the locknut tool)
3) Needlenose pliars
4) 8mm allen key
That's it and it is a very easy job even if you are not mechanically minded. This will take you through it:
http://elise-faq.info/index.php?title
1) Jack
2) Spanner for wheelnuts (17 goes on the locknut tool)
3) Needlenose pliars
4) 8mm allen key
That's it and it is a very easy job even if you are not mechanically minded. This will take you through it:
http://elise-faq.info/index.php?title
shangani said:
To change brake pads, you need minimal tools:
1) Jack
2) Spanner for wheelnuts (17 goes on the locknut tool)
3) Needlenose pliars
4) 8mm allen key
1) Jack
2) Spanner for wheelnuts (17 goes on the locknut tool)
3) Needlenose pliars
4) 8mm allen key
hmm, of all those, I have the Allen Key!!
I may try a mates garage if no-one around Bournemouth is free before Friday (off to Cornwall then).
Oh wll, back to teh clay bar for me today then!!
Bing o said:
shangani said:
To change brake pads, you need minimal tools:
1) Jack
2) Spanner for wheelnuts (17 goes on the locknut tool)
3) Needlenose pliars
4) 8mm allen key
1) Jack
2) Spanner for wheelnuts (17 goes on the locknut tool)
3) Needlenose pliars
4) 8mm allen key
hmm, of all those, I have the Allen Key!!
I may try a mates garage if no-one around Bournemouth is free before Friday (off to Cornwall then).
Oh wll, back to teh clay bar for me today then!!
And as far as I recall from doing mine (twice) , you don't need an allen key.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


