Brake Disc Feedback / Recommendation ?
Brake Disc Feedback / Recommendation ?
Author
Discussion

crazy6

Original Poster:

59 posts

248 months

Wednesday 11th April 2007
quotequote all
Sick of stock discs ( rusting between uses and then needing a fair bit of driving to clear up ). Looking at eliseparts S1 Turbo Grooved Brake Discs (£255) or posssibly the Aluminium Belled, Drilled & Grooved Discs (£485) with Mintex 1144 pads. Any comments on whether there is much performance difference between them etc.... I am planning on 2-3 track days this year but mostly I use her for weekend driving when its sunny

kevin ritson

3,423 posts

258 months

Wednesday 11th April 2007
quotequote all
You'll be fine with Turbogrooves, however seeing as everything made by EBC is apparently rubbish, 500 people will now persuade you to take the overkill ali-bell option hehe

S Works

10,166 posts

281 months

Wednesday 11th April 2007
quotequote all
Nope, not me.

Actually unless the std discs need replacing I'd simply leave them on there and get some 1144 pads for the application you're suggesting you'll need. Ali-belled discs will be overkill IMO.

Hollywood Wheels

3,689 posts

261 months

Wednesday 11th April 2007
quotequote all
You want some AP gold racing ninja discs and some Greentuff physho killer pads. Jobs a good 'un....

toxic frog

3,227 posts

298 months

Wednesday 11th April 2007
quotequote all
give JRT Automotive a call

http://stores.ebay.co.uk/JRT-AUTOMOTI

he's commonly regarded as the best value place to get EBC Turbo discs from... i bought a full set of EBC's and a full set of Mintex pads... was way cheaper than anywhere else with very prompt service to boot.

don't forget to change the brake fluid at the same time... you may also consider replacing the hoses with braided jobbies whilst you are at it... get it all done in one shot.

crazy6

Original Poster:

59 posts

248 months

Wednesday 11th April 2007
quotequote all
was planning to leave hoses as I like the fact that the brakes can be applied in a more....subtle way to strat off with and then hard and grippier if you press down more. I was told the braided hoses can make them a bit "twitchy" and on/off. Hope that makes sense?

shangani

3,069 posts

268 months

Wednesday 11th April 2007
quotequote all
crazy6 said:
was planning to leave hoses as I like the fact that the brakes can be applied in a more....subtle way to strat off with and then hard and grippier if you press down more. I was told the braided hoses can make them a bit "twitchy" and on/off. Hope that makes sense?


Not true. Braided lines help when the brake fluid is really hot and the normal lines soften (at least as far as I noticed) The braided lines just helped remove some sponginess under hard braking on track. For normal road driving, it doesn't make much of a difference at all.

For road use EBC's are fine, but then again, you can get AP's for only 4 times the price.laugh Joking - EBC's don't corrode as much and are fine for road and light track use. (2-3 days a year). My car sees 20+ trackdays a year, so I use ali-belled. When the fronts go I will get bigger AP discs, but ONLY because of my useage. Mintex 1144's will also be fine and are great value.

crazy6

Original Poster:

59 posts

248 months

Wednesday 11th April 2007
quotequote all
How long would I get from the Ali Bellied ones in general? ( I do about 6-7K a year 90% road )

shangani

3,069 posts

268 months

Wednesday 11th April 2007
quotequote all
crazy6 said:
How long would I get from the Ali Bellied ones in general? ( I do about 6-7K a year 90% road )


I have done about 10K and 16 trackdays on mine. Fronts have about a 0.5mm lip on them (did that to OE discs within 2 trackdays) Rear disc wear in less than negligeable.

dunxs1

282 posts

283 months

Wednesday 11th April 2007
quotequote all
toxic frog said:
give JRT Automotive a call

http://stores.ebay.co.uk/JRT-AUTOMOTI

he's commonly regarded as the best value place to get EBC Turbo discs from... i bought a full set of EBC's and a full set of Mintex pads... was way cheaper than anywhere else with very prompt service to boot.

don't forget to change the brake fluid at the same time... you may also consider replacing the hoses with braided jobbies whilst you are at it... get it all done in one shot.


Another vote for JRT. I have just bought turbo discs and 1144 pads from them. Very quick efficient service and a good enough saving to pay somone else to fit em'

Dunx.

TIPPER

2,955 posts

250 months

Wednesday 11th April 2007
quotequote all
Another vote for the EBC turbodiscs and Mintex 1144 combination. Have it on my car (road use only so far) and it works very well. Excellent stopping power and feel. I do intend trading up to the ali bells/Pagid combo next but only because I can see the car getting used harder in the future.

cyberface

12,214 posts

288 months

Wednesday 11th April 2007
quotequote all
kevin ritson said:
You'll be fine with Turbogrooves, however seeing as everything made by EBC is apparently rubbish, 500 people will now persuade you to take the overkill ali-bell option hehe



EBC discs are great value and I've not heard anyone complain about them.

If you want EBC pads to go with the discs, then get EBC **RED** ceramic pads - they are really rather good. I used a set last year for track days and they were excellent, with great initial bite, solid pedal, no fade and crucially, no squeal when used lightly on road or through town.

I admit to being fairly vocal with my dislike for EBC's Green pad on light cars, as any search will show. But I will NOT be painted as anti-EBC by anyone. A quick search will show my praise for their Red pads very quickly. I reckon the Red pad would suit the Elise and Exige brilliantly... compared to the price of Pagid (which is probably the best), the Red pad may be a great value competitor. I don't know of anyone who's tried them though. My Reds were on a 993, not a Lotus.