PAINTING BLACK PLASTIC BITS
PAINTING BLACK PLASTIC BITS
Author
Discussion

rhy 11s

Original Poster:

78 posts

248 months

Thursday 12th April 2007
quotequote all
Do people have any suggestions on how to bring out the best in the black plastic bits on my Mk2 Elise? (ie: the side scoop 'protectors', and especially the plastic grilles on the boot).

The car's only three years old but they are starting to look quite grey now. I was thinking of taking them out and painting them...any ideas/suggestions on what to do/use? Thanks

NWtony

3,011 posts

259 months

Thursday 12th April 2007
quotequote all
back to black or any of the similar products works quite well. The one I use is the "williams F1" branded one from halfords but Ionly got it because it was cheap. Its very good at covering polish marks as well. I have heard of them being sprayed to match the colour of the car which looks quite good if you want something a little different.


Edited by NWtony on Thursday 12th April 11:47

bogie

17,109 posts

303 months

Thursday 12th April 2007
quotequote all
back to black is fine and lasts about a month...spraying them is a pain in the ass - some of them are difficult to remove without breaking them, also as they are pimpled you really need to sand them all down a lot to get paint to stick...probably not worth the effort

kermitman

5,426 posts

240 months

Thursday 12th April 2007
quotequote all
back to black is ok, the best thing for bringing back plastic is WD40.

spray it on, wipe over with a rag and voila. ive used it for years on all my cars, you dont get any runs either when it rains.

beachbum

2,610 posts

262 months

Thursday 12th April 2007
quotequote all
kermitman said:
back to black is ok, the best thing for bringing back plastic is WD40.

spray it on, wipe over with a rag and voila. ive used it for years on all my cars, you dont get any runs either when it rains.


Does it get rid of polish marks ?

Lotustuart

1,465 posts

262 months

Thursday 12th April 2007
quotequote all
beachbum said:
kermitman said:
back to black is ok, the best thing for bringing back plastic is WD40.

spray it on, wipe over with a rag and voila. ive used it for years on all my cars, you dont get any runs either when it rains.


Does it get rid of polish marks ?



Peanut butter! Thats what you need, it gets rid of polish marks on plastic. Something to do with the oil in it and I guess the tiny bits act as the abrassive. Strange I know, but I know peple that swear by it!

renmure

4,952 posts

255 months

Thursday 12th April 2007
quotequote all
said:
Peanut butter! Thats what you need, it gets rid of polish marks on plastic. Something to do with the oil in it and I guess the tiny bits act as the abrassive. Strange I know, but I know peple that swear by it!


I have heard that a few times now. Always assumed it was a wind up. Looks like there is something to it!!

TonyHetherington

32,091 posts

281 months

Thursday 12th April 2007
quotequote all
I looked into exactly this last year - it's quite expensive to do and as boggy says, some of the bits are very difficult.

I use "poorboy's" trim blackener which works well, the key to it is simply keeping up with it. Once a week or two weeks when you clean and it looks good all the time. Once a year and you'll struggle.

Good tip about the peanut butter though! Or am I going to look a right plank walking to my car with a jar of KP ......?

kermitman

5,426 posts

240 months

Thursday 12th April 2007
quotequote all
beachbum said:
kermitman said:
back to black is ok, the best thing for bringing back plastic is WD40.

spray it on, wipe over with a rag and voila. ive used it for years on all my cars, you dont get any runs either when it rains.


Does it get rid of polish marks ?



on plastic it would yes as it restores the plastic to its original colour, try a small bit and see

i use it everytime i was my car or truck then it always looks showroom condition for the sake of an extra 5 minutes work when cleaning it. its also good for getting pitting/salt/grime of stainless steel parts too.

on the peanut butter idea, my mate used to swear by cleaning his windscreen with toothpaste yikes how he found this out to be any good ive no idea, he also used to butter black targa roofs on 70's/80's cars.

black boot polish is another good tip for tyres too

Paul RN

1,168 posts

245 months

Thursday 12th April 2007
quotequote all
www.fasteronline.co.uk/bumper-care-p-437.html

"Autoglym Bumper Care cleans and revives colour, restoring plastic trim to its original finish.

The rejuvenating gel continues to protect the surface by forming a tough, translucent, flexible barrier against atmospheric pollution.

Got a problem with polish overspill?
Autoglym Bumper Care easily removes dried on polish and wax stains from bumpers and trim. It genuinely enhances the appearance of matt black paintwork on trim, sill panels, emblems, grilles and vents.

You can use Autoglym Bumper Care on all unpainted exterior plastic and rubber components, including bumpers, fenders, grilles, mirror casings, moldings, trim, tire walls, spoilers, vinyl convertible roofs and mud flaps."

*edit* they sell it at Halfrauds too



Edited by Paul RN on Thursday 12th April 17:45

abz 7001

383 posts

283 months

Friday 13th April 2007
quotequote all
My 2002 S2 is fully colour coded - Sinclaires did it about two years ago - wasnt cheap but I love it - they colourmatched and sprayed every black plastic piece (about 13 pieces in all) With Alvan front splitters and rear diffuse all colour coded and rear exhuast grilles silvered up it looks quite striking - 2 years on though the first bubles are beginning to show in tight corners. Will try to post pics - just need to rehost this weekend. Welcome to take a look if you are near London? Stuart