Light switches 1996
Discussion
Maplins / RS do switches like this. You may have to use the black button covers off yourexisting ones to ensur a good match.
eg:www.maplin.co.uk/module.aspx?ModuleNo=19261&doy=13m4
You want the Double Pole Latching switch & black caps.
Dave
eg:www.maplin.co.uk/module.aspx?ModuleNo=19261&doy=13m4
You want the Double Pole Latching switch & black caps.
Dave
I'd test the switches first - all 4 are the same (fog / light / main / dash). Its quite tricky to split the radio panel/switch rack just to replace switches.. once you release the radio panel you will have access to the wiring & switches - I didnt know you could access them from the top of the dash.
Dave
Dave
Have you got the radio panel out yet? I think there is a guide on the Chim pages for the dash, but not sure about the radio panel?
Remove radio & cage, 4 screws hold the panel in - you should see them as the cage is removed. The switch mounting rack is interlocked to the facia (and bound + aradalite commonly) - it has to be removed for the switches to be replaced IIRC. In the absence of anything else that should be enough info to get to the switches, just remember a lot of the cars differ a tad.. Do make a note of the wiring to the switches, its a bit of a jungle behind those ones (not to say they are correct to start with
)
Dave
Remove radio & cage, 4 screws hold the panel in - you should see them as the cage is removed. The switch mounting rack is interlocked to the facia (and bound + aradalite commonly) - it has to be removed for the switches to be replaced IIRC. In the absence of anything else that should be enough info to get to the switches, just remember a lot of the cars differ a tad.. Do make a note of the wiring to the switches, its a bit of a jungle behind those ones (not to say they are correct to start with
) Dave
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


