Help needed chaps
Discussion
Just taken a spin out to take a look at what is said to be a tvr 4.0 se i got there to find a smart looking wedge with a defo 350i front end and dash lay out but with the backward later style clocks and dials, boot spoiler and oz wheels not the latice type like my 350. Unfortunatly the owner was out so couldn't lift the lid to see the engine, it is a G plate, where any 400i made or do you think it is a bodge together job?. Also where can I check the reg on line ?
digga951 said:
Prehaps it was a 350 SE. They had the 350i style body shape, 350i style dash, but with a 4.0 (ish) engine. Various wheels and combinations of boot spoilers were used, and the majority of them were around the "G" plate registration.
Edited by digga951 on Sunday 15th April 23:51
Thanks for that sounds about right any idea of value ie same as 350i or as 390 ?
O.k bit of a update, I have spoken to the owner and this is what he has told me. The car is a 350se limited edition origanaly had a gold pin stripe down the side with a small crest on each wing and the bonnett he bought it as a cat d rear end damage but panels only, it lived in south wales and had a private plate tvr 350s. He wants £5000 for it it will have 12 months ticket and the only thing wrong with it is the exhaust is about shot.
Ok then it's one of the 25 limited edition SEs. I would ask him what number it is. The badge on the door would have have a number on it.
Thread here............www.pistonheads.com/gassing/topic.asp?h=0&t=29449&hw=350se
Thread here............www.pistonheads.com/gassing/topic.asp?h=0&t=29449&hw=350se
Edited by dickymint on Wednesday 18th April 18:41
Gassing Station | Wedges | Top of Page | What's New | My Stuff


