Anyone know of a 250mm clutch with 1.1/8" 10 spline input?

[SXS]

A mate is looking for a clutch meeting this spec? anyone know of a stock fitment matching this?

[350matt]

10 splines are used a lot by the yanks, I'd suggest giving EBC clutches a call they're usually very helpful with this sort of thing

Matt

[stevieturbo]

Some BMW use quite a coarse spline like that too....

Although Helix, Supeclutch etc some of the local suppliers should be able to make up pretty much any clutch required Id think..

Old website

www.clutchnet.com/make/bmw.html

[martind]

SXS said:

A mate is looking for a clutch meeting this spec? anyone know of a stock fitment matching this?

A quick look in my parts catalogs shows
General Motors ( Chevy/Pontiac etc.) used a 1 1/8th x 10 spline but with a 9 1/8th (231mm) or 10 1/2(266mm) disc or American Motors (Jeep) used a 1 1/8 10 spline but a 9 1/4 (234mm)disc.

Edited by martind on Sunday 15th April 22:32

[GavinPearson]

If you want a clutch made then try contacting AP racing in Coventry. They can make pretty much anything you want.

[chrisj]

I got a 9.5" AP clutch plate with a 10 spline 1-1/16" fit from John Eales. It's to fit a Mustang T5. Wasn't cheap though.