removing rear numberplate on S1
removing rear numberplate on S1
Author
Discussion

mnewlyn

Original Poster:

413 posts

282 months

Thursday 19th April 2007
quotequote all
I've plulled a bit on it but nervous about pulling too hard, since i cant figure how it's fixed on.
it can't be velcro.

zasker

587 posts

235 months

Thursday 19th April 2007
quotequote all
From what I can remeber on my S1 the number plate was held on with double sided sticky tape. Took it off a few times to change plates and managed not to break anything

Hollywood Wheels

3,689 posts

261 months

Thursday 19th April 2007
quotequote all
Pour plenty of warm water behind it and tug gently, it'll come off with no worries.....

S Works

10,166 posts

281 months

Thursday 19th April 2007
quotequote all
Originally it'll have been screwed in. Presumably these aren't there though right? If so it's probably stuck on, but a quick check from the inside (via the boot) is a worthwhile check before you start wrenching at it.

If nothing visible get a hairdryer and warm up the plate around the areas where you can feel resistance. If it's glued, it should come off with some gentle persuasion.