Squeaky Brakes, Driving Me Crazy!
Discussion
Hi All
The breaks on my S1 squeak all the time and I think it's getting louder. I took it to Bell & Colvill service department and was told this is normal. He didn’t even look/drive/hear the car so how he could tell, maybe he had his crystal ball under the counter. Does anyone else suffer with this problem and is there a fix?
Thanks
The breaks on my S1 squeak all the time and I think it's getting louder. I took it to Bell & Colvill service department and was told this is normal. He didn’t even look/drive/hear the car so how he could tell, maybe he had his crystal ball under the counter. Does anyone else suffer with this problem and is there a fix?
Thanks
You probably won't know just by looking at them in that case. Do the pads look like they have life left in them, if they were on the way out I'd expect to hear grinding rather than squeeling, but you never know? Just take it out for a few high speed runs. Find a nice straight bit of road, bring it up to about 70+, then HARD braking to about 10-20. Do this a few times, it should help. Before doing this it might be worth just spraying some halfords brake cleaner liberally around the caliper and pad..........just be careful for the first few applications of the brakes after that! Copper grease around the rear of the pad will also help, but hopefully a few high speed stops will sort it....
Hard race pads like the Pagids will squeal pretty much in all cases unless very carefully bedded in. You shouldn't get squeal from standard pads or things like Greenstuff.
Normally the pads come with 'anti-squeal shims' which are placed behind the pad and prevent the high-frequency vibrations you hear as squeal. Copperslip behind the pads is a less reliable solution but an alternative, as pointed out.
Perhaps whoever fitted your pads didn't fit the anti-squeal shims, or you've got particularly lairy pads in there, or they weren't bedded in correctly when initially fitted.
Even mid-spec pads like Mintex 1144 can squeal if not bedded in properly. Your only recourse may be to get the pads replaced, anti-squeal shims fitted, and then bed the pads in exactly as instructed by the pad manufacturer.
Normally the pads come with 'anti-squeal shims' which are placed behind the pad and prevent the high-frequency vibrations you hear as squeal. Copperslip behind the pads is a less reliable solution but an alternative, as pointed out.
Perhaps whoever fitted your pads didn't fit the anti-squeal shims, or you've got particularly lairy pads in there, or they weren't bedded in correctly when initially fitted.
Even mid-spec pads like Mintex 1144 can squeal if not bedded in properly. Your only recourse may be to get the pads replaced, anti-squeal shims fitted, and then bed the pads in exactly as instructed by the pad manufacturer.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



