Anyone used quick release service panel bolts?
Anyone used quick release service panel bolts?
Author
Discussion

TonyHetherington

Original Poster:

32,091 posts

281 months

Tuesday 24th April 2007
quotequote all
Afternoon all

Quick question, has anybody ever used these...

http://tinyurl.com/ytq5ey

Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier thumbup

Any thoughts?

Cheers chaps
Me

benmac

1,706 posts

247 months

Tuesday 24th April 2007
quotequote all
Yep, doddle to fit and make taking the panels off so much easier. bear in mind that the outermost one has to stay as a threaded insert so its not QR on all of them. Still, overall its lots quicker.

TonyHetherington

Original Poster:

32,091 posts

281 months

Tuesday 24th April 2007
quotequote all
Ah cool so I could just use the two best bolts to retain the ones not rounded out and use those?

Thanks for the reply!

S Works

10,166 posts

281 months

Tuesday 24th April 2007
quotequote all
benmac said:
Yep, doddle to fit and make taking the panels off so much easier. bear in mind that the outermost one has to stay as a threaded insert so its not QR on all of them. Still, overall its lots quicker.

Agreed. A bit pricey for what it is Tony but worthwhile keeping the ones you don't need in the boot as spares. You WILL drop one down inside the front again at some point. You just know it

nigelayres

22 posts

255 months

Tuesday 24th April 2007
quotequote all
TonyHetherington said:
Afternoon all

Quick question, has anybody ever used these...

http://tinyurl.com/ytq5ey

Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier thumbup

Any thoughts?

Cheers chaps
Me


I had these on my 135R. I got so fed up with them coming loose that I went back to the fixed ones. The need to remove the panels is pretty rare, so I didn't really see it as a problem. The covers never actually came off, but they were certainly flopping around.

So, is it really necessary to have quick release on a panel that's rarely opened?

Nigel

sigmamark

25 posts

235 months

Tuesday 24th April 2007
quotequote all
These are very similar to the Dzus fasteners I use on my race bike. Before I started taping over them, I would typically lose a couple at each trackday. If the backing plate is properly adjusted (bent) and the fastener length is spot on, they are fine, otherwise I would give them a miss unless you take the panels off very regularly. People like Demon Tweaks do a range of similar fasteners with D Ring and slotted heads which might be worth a look.

philygumbo

1,500 posts

280 months

Tuesday 24th April 2007
quotequote all
I have them they are a waste of money.

mattv

2 posts

288 months

Tuesday 24th April 2007
quotequote all
nigelayres said:
TonyHetherington said:
Afternoon all

Quick question, has anybody ever used these...

http://tinyurl.com/ytq5ey

Are they any good and are they easy to fit? A dealer (that will remain nameless) rounded off 3 of my 6 bolts (i was NOT happy but found out a couple of months after car had been with them so was in no position to point it out to them)...anyway, an excuse for the quick release ones so that I can clean a lot easier thumbup

Any thoughts?

Cheers chaps
Me


I had these on my 135R. I got so fed up with them coming loose that I went back to the fixed ones. The need to remove the panels is pretty rare, so I didn't really see it as a problem. The covers never actually came off, but they were certainly flopping around.

So, is it really necessary to have quick release on a panel that's rarely opened?

Nigel


Depends if your washer bottle is in the front. The 135R was one of the first S2s to move it to the engine bay I think, so after it moved they become less advantageous.

TonyHetherington

Original Poster:

32,091 posts

281 months

Wednesday 25th April 2007
quotequote all
Thanks for the opinions, guys!

I don't take them off THAT much - especially as I have no service items under there (non washer bottle or anything like that!) - it was mainly just because I had rounded off bolts.

Ok next question then; where can I get a replacement set of bolts? Or is it just a Lotus jobbie?

Thanks people!

S Works

10,166 posts

281 months

Wednesday 25th April 2007
quotequote all
TonyHetherington said:
Thanks for the opinions, guys!

I don't take them off THAT much - especially as I have no service items under there (non washer bottle or anything like that!) - it was mainly just because I had rounded off bolts.

Ok next question then; where can I get a replacement set of bolts? Or is it just a Lotus jobbie?

Thanks people!

In which case deffo don't replace Tony. Just not worth it IMO. I imagine the regular spots will be able to get you replacements. Failing that, call Lipscombs.

pasthim

19,436 posts

265 months

Wednesday 25th April 2007
quotequote all
Blimey! That's a lot of messing. I just have two allen headed bolts and they come off. Only ever taken them off to see what's underneath. I guess they changed the desingn on mine