Lost Teeth ... Sagaris Splitter

[rpa.janwell]

Well chaps, slight prang the other day, fortunately cosmetic, but lost some teeth.

Anyone know of a full set available?

There is someone in the process of moulding new, but in the interim, and it may be an extended interim, would like to put the teeth back in.

[DJC]

Extended interim Rich?

[rpa.janwell]

Everything else going back together over the next couple of days - just lost my teeth!!

[VARLEYHYD]

My teeth still intact; but just for record.
Teeth No.
No.1 Male Pheasant size instant plucking no problem.
No.2 Grouse size just wedges in.
No.3 No experience yet
No.4 Baby bunny rabbit fits all the way through and sits next to the aircon drier until you find him!

Trust your dental technician has sorted

[rpa.janwell]

Still looking for dentist.

One option is still some days away, so may have to use some temps.

The Grouse Catcher and Bunny Scoop are quite realistic up in Aberdeen.

Thinks - any worthwhile modifications to enhance the Pheasant Plucker option??!!

[DJC]

I guess everybody get their orders in now for specially selected Janwell Estates Grouse!

[rpa.janwell]

I'd settle for stripped bunny.....

[VARLEYHYD]

rpa.janwell said:

Still looking for dentist.

One option is still some days away, so may have to use some temps.

The Grouse Catcher and Bunny Scoop are quite realistic up in Aberdeen.

Thinks - any worthwhile modifications to enhance the Pheasant Plucker option??!!

Have problems in the Moorlands with bunnies, grouse and grounding.
Thought about trying to protect from front grounding,possible carbon full car width splitter bolting under the existing, and similar small one over the skid plate at rear???

[rpa.janwell]

VARLEYHYD said:

rpa.janwell said:

Still looking for dentist.

One option is still some days away, so may have to use some temps.

The Grouse Catcher and Bunny Scoop are quite realistic up in Aberdeen.

Thinks - any worthwhile modifications to enhance the Pheasant Plucker option??!!

Have problems in the Moorlands with bunnies, grouse and grounding.
Thought about trying to protect from front grounding,possible carbon full car width splitter bolting under the existing, and similar small one over the skid plate at rear???

Interesting: worth a look at the Topcats Sagaris splitter, and the Black and Red V8 racing Sagaris front ends, scattered about various threads here.

[Daftlad]

VARLEYHYD said:

rpa.janwell said:

Still looking for dentist.

One option is still some days away, so may have to use some temps.

The Grouse Catcher and Bunny Scoop are quite realistic up in Aberdeen.

Thinks - any worthwhile modifications to enhance the Pheasant Plucker option??!!

Have problems in the Moorlands with bunnies, grouse and grounding.
Thought about trying to protect from front grounding,possible carbon full car width splitter bolting under the existing, and similar small one over the skid plate at rear???

I was the victim of Sat Nav...and stupidity on Sunday.

Was lead down a forest trail (in Sagaris) by that wifey with the annoying voice........ never once told me to do a U-turn (but couldn't anyway). Three miles and then back again when I did get turned around. I was amazed at how much clearance there was by riding with one wheel on the middle part of the track (and the other in the gundge at the side of the track).

Not a normal technique, but I thought it was topical. )

[VARLEYHYD]

rpa.janwell said:

VARLEYHYD said:

rpa.janwell said:

Still looking for dentist.

One option is still some days away, so may have to use some temps.

The Grouse Catcher and Bunny Scoop are quite realistic up in Aberdeen.

Thinks - any worthwhile modifications to enhance the Pheasant Plucker option??!!

Have problems in the Moorlands with bunnies, grouse and grounding.
Thought about trying to protect from front grounding,possible carbon full car width splitter bolting under the existing, and similar small one over the skid plate at rear???

Interesting: worth a look at the Topcats Sagaris splitter, and the Black and Red V8 racing Sagaris front ends, scattered about various threads here.

Tim Hoods & Fred Tongue's V8 Sagaris racers splitters are made from plywood and then layered over,

Edited by VARLEYHYD on Tuesday 1st May 15:35