CLUTCH GONE..HELP!!

[baguaman]

clutch as gone..with all the symptons as the other post,....whats is the best possible clutch to fit...

thanks guys....(the joys of cerbera ownership)

[Cooky]

Try Joo at Trackcar he was telling me of some different options when we spoke at the Chatsworth meet last weekend

[hugepiece]

ive recently had one of the clevor trevor raceprooved ones fitted. Stil bedding in but is much softer and i'm told will last maybe twice as long as the original AP one.

[mad mark]

www.clever-trevor.net/tvr-part-category/6-clutch-components.html

[jensena]

Another Vote from me the Clever Trevor clutch too - quality product, great technical back-up, brilliant customer service.

[amazon]

Three months into my Clever Trevor clutch and feels great. It appears that my first clutch lasted some 40K miles, so if I does last twice as long, I'll be very happy!

[baguaman]

guys...apart from the parts what should the work cost to do...

ie..if its slave cylinder..how much..if ys cluctch as well ...how much..

let me know....

its a real fxxxking shame cos i have been working on building the driveability of this car...

[BLUETHUNDER]

baguaman said:

guys...apart from the parts what should the work cost to do...

ie..if its slave cylinder..how much..if ys cluctch as well ...how much..

let me know....

its a real fxxxking shame cos i have been working on building the driveability of this car...

Personally i would change both,as the slave sits within the bell housing.Nothing worse than doing one job then to have the other follow a few months later.Im doing mine myself.But expect around £1500 to supply and fit from an independant.

Edited by BLUETHUNDER on Sunday 29th April 14:45

[warpig1]

BLUETHUNDER said:

baguaman said:

guys...apart from the parts what should the work cost to do...

ie..if its slave cylinder..how much..if ys cluctch as well ...how much..

let me know....

its a real fxxxking shame cos i have been working on building the driveability of this car...

Personally i would change both,as the slave sits within the bell housing.Nothing worse than doing one job then to have the other follow a few months later.Im doing mine myself.But expect around £1500 to supply and fit from an independant.
same thoughts here, pulled the box yesterday took just under 2 hours to get it out. once you fit your new bits and clean up etc, its a good days labour(but not as bad a job as you'd think)

Edited by BLUETHUNDER on Sunday 29th April 14:45

[ESSO]

BLUETHUNDER said:

baguaman said:

guys...apart from the parts what should the work cost to do...

ie..if its slave cylinder..how much..if ys cluctch as well ...how much..

let me know....

its a real fxxxking shame cos i have been working on building the driveability of this car...

Personally i would change both,as the slave sits within the bell housing.Nothing worse than doing one job then to have the other follow a few months later.Im doing mine myself.But expect around £1500 to supply and fit from an independant.
I did mine myself,make sure you checkout the master cylinder too cus when i bled the clutch i found the seals were shot,new master cylinder is £70.

Edited by BLUETHUNDER on Sunday 29th April 14:45

[sirblock]

1500...is stupid money...the kit is 679 pounds...and it should take about four to five houts to fit...email me if u need the name of a honest independant

[BLUETHUNDER]

sirblock said:

1500...is stupid money...the kit is 679 pounds...and it should take about four to five houts to fit...email me if u need the name of a honest independant

Thats around about figure on what most independants charge.Thats why im doing mine myself.

[XTR2Turbo]

I had my Tuscan clutch and slave changed by a local mechanic las weekend. Took 3 hours and he did an excellent job. If steam cleaned the gearbox whils it was out and replaced all the slightly rusted nuts holding on the front splitter with nice shiny new ones. PM me if you want his contact details.

David