Replacement Badge (If only that simple, little help please)
Discussion
On the back of my Elise, there just the metal holder, not the nice badge on the back... like that when i got it (so no need for hoodie rants
)
Now if all of it was not there, i could just put on of these on there clicky , but the 'metal' bit is still there.
Any suggestion for a hammer crazy amatuer in getting a new badge on there? Thoughts of trying to remove it evoke images of a smashed rear clam... I guess there might be the option of just a replacement thin badge to put on there but can't seem to find such things.
Thanks!
-mahju
) Now if all of it was not there, i could just put on of these on there clicky , but the 'metal' bit is still there.
Any suggestion for a hammer crazy amatuer in getting a new badge on there? Thoughts of trying to remove it evoke images of a smashed rear clam... I guess there might be the option of just a replacement thin badge to put on there but can't seem to find such things.
Thanks!
-mahju
Hello mate,
If you know of a body shop suppliers near buy they will have the correct tools for the job and will be able to give free advice.
If Not you can do it yourself: See Below
What you need to do is boil the kettle (yes kettle) and pour the hot water over the top of the badge as to soften the glue. If you have a big flat bladed screw driver cover the tip in electrical tape or similar so not to damage paint work and peal off the badge.
All of that needs to be done fairly quick so the glue is soft. You will be left with some glue still on the car but this picks of with your finger. then you can replace the badge.
Let me know how you get on.
If you know of a body shop suppliers near buy they will have the correct tools for the job and will be able to give free advice.
If Not you can do it yourself: See Below
What you need to do is boil the kettle (yes kettle) and pour the hot water over the top of the badge as to soften the glue. If you have a big flat bladed screw driver cover the tip in electrical tape or similar so not to damage paint work and peal off the badge.
All of that needs to be done fairly quick so the glue is soft. You will be left with some glue still on the car but this picks of with your finger. then you can replace the badge.
Let me know how you get on.
row10036802 said:
Hello mate,
If you know of a body shop suppliers near buy they will have the correct tools for the job and will be able to give free advice.
If Not you can do it yourself: See Below
What you need to do is boil the kettle (yes kettle) and pour the hot water over the top of the badge as to soften the glue. If you have a big flat bladed screw driver cover the tip in electrical tape or similar so not to damage paint work and peal off the badge.
All of that needs to be done fairly quick so the glue is soft. You will be left with some glue still on the car but this picks of with your finger. then you can replace the badge.
Let me know how you get on.
If you know of a body shop suppliers near buy they will have the correct tools for the job and will be able to give free advice.
If Not you can do it yourself: See Below
What you need to do is boil the kettle (yes kettle) and pour the hot water over the top of the badge as to soften the glue. If you have a big flat bladed screw driver cover the tip in electrical tape or similar so not to damage paint work and peal off the badge.
All of that needs to be done fairly quick so the glue is soft. You will be left with some glue still on the car but this picks of with your finger. then you can replace the badge.
Let me know how you get on.
Thanks
Sounds an interesting challange in getting water to the glue bit to make it soft enough as the car curves in on the back, but seems like it could be a go-er
mahju said:
row10036802 said:
Hello mate,
If you know of a body shop suppliers near buy they will have the correct tools for the job and will be able to give free advice.
If Not you can do it yourself: See Below
What you need to do is boil the kettle (yes kettle) and pour the hot water over the top of the badge as to soften the glue. If you have a big flat bladed screw driver cover the tip in electrical tape or similar so not to damage paint work and peal off the badge.
All of that needs to be done fairly quick so the glue is soft. You will be left with some glue still on the car but this picks of with your finger. then you can replace the badge.
Let me know how you get on.
If you know of a body shop suppliers near buy they will have the correct tools for the job and will be able to give free advice.
If Not you can do it yourself: See Below
What you need to do is boil the kettle (yes kettle) and pour the hot water over the top of the badge as to soften the glue. If you have a big flat bladed screw driver cover the tip in electrical tape or similar so not to damage paint work and peal off the badge.
All of that needs to be done fairly quick so the glue is soft. You will be left with some glue still on the car but this picks of with your finger. then you can replace the badge.
Let me know how you get on.
Thanks
Sounds an interesting challange in getting water to the glue bit to make it soft enough as the car curves in on the back, but seems like it could be a go-er
/takes note
I'll be doing this myself soon (suprise, suprise!) as I'm just about to order the L O T U S lettering and a black and chrome front clam badge.
I was going to try the hairdryer from inside the boot and dental floss option as I've used on other cars but I'd be interested if this is easier.
21TonyK said:
I'll be doing this myself soon (suprise, suprise!) as I'm just about to order the L O T U S lettering and a black and chrome front clam badge.
I was going to try the hairdryer from inside the boot and dental floss option as I've used on other cars but I'd be interested if this is easier.
I was going to try the hairdryer from inside the boot and dental floss option as I've used on other cars but I'd be interested if this is easier.
The black badge would be a little lost on my car, being black itself... but the dental floss option would be interesting alternative.
Fishing line and an old (out of date!) credit card. Heat up rear by standing car in the sunlight or heat for a while - but not to long - with a hairdryer. Gently prise line behind the badge and move backwards and forwards cutting through the glue. Finally use plastic to prise badge away from the rear of car.
111KAB
111KAB
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


