1 month in... HGF
Discussion
Had my liz for approx 300 miles and she went
I know I'm new but I can't be that bad for her!?
Luckily it was caught early and no damage was made to the gasket or engine, the gasket didn't even need skimming!
Picked her up today but some of the 'new' excitement has gone after having an issue like this so soon after buying her. I aso feel I've got to re-learn what experience I had gained in such a short time and I don't want to push her at the moment... ?
All said and done I have my dream back in the car port and boy does she look good being back at home. I guess once the other half calms down
and lets me back out in her that feeling will be back... will just have to put that re-trim back a bit
Lee
I know I'm new but I can't be that bad for her!? Luckily it was caught early and no damage was made to the gasket or engine, the gasket didn't even need skimming!
Picked her up today but some of the 'new' excitement has gone after having an issue like this so soon after buying her. I aso feel I've got to re-learn what experience I had gained in such a short time and I don't want to push her at the moment... ?
All said and done I have my dream back in the car port and boy does she look good being back at home. I guess once the other half calms down
and lets me back out in her that feeling will be back... will just have to put that re-trim back a bit
Lee
Capt Cave Man said:
I aso feel I've got to re-learn what experience I had gained in such a short time and I don't want to push her at the moment... ?
Just make sure the oil is up to temp before flooring it and you'll be fine. It can take quite a long time compared to the water temperature.
I don't go above 3k rpm for the first 10 minutes,then for the next 5 minutes I don't go above 4k . And then I start pushing it a bit.
My 'liz has had HGF in it's previous ownership,so the OE plastic dowel pins have been changed to steel and also a reinforced headgasket .
I'm not worried it'll blow again
and if it does I'll use that as a lame excuse for a honda swap anyway,so it's a win win situation 
Capt Cave Man said:
Had my liz for approx 300 miles and she went
I know I'm new but I can't be that bad for her!?
Luckily it was caught early and no damage was made to the gasket or engine, the gasket didn't even need skimming!
I know I'm new but I can't be that bad for her!? Luckily it was caught early and no damage was made to the gasket or engine, the gasket didn't even need skimming!
I hope there was some damage to the gasket , or youve just been well and truely ripped off.
Not a mechanic but here goes...
Firstly it was a private purchase… doh!
I have also got the AA cover as suggested by sWorks, I think? but just wanted her back on the road asap and didn’t want to risk taking her out again just to see if they would pay up after taking out the policy so soon.
The previous week I had lost most of the water in the reservoir. I had taken her in and had her checked out at my local specialist FOC who has looked after the car for 5 years prior to my purchase.
Oil, hoses, rad, temp etc. all checked but this didn’t show up anything apart from a slightly loose hose. The diagnosis was a suspected air bubble in the rad so the valve was tweaked, a little air came out and it was assumed it may have resolved itself. Everything was topped up and all seemed OK, even when the fan kicked in, spot on 102C, the only issue was that the 2 temp sensor readings were approx 5C out from one another but nothing worth changing so after a coupe of hours I took the long journey home and that was that…
I didn’t get near her until the following Sat… before doing anything I checked her over and the reservoir was virtually empty so again. Had no spillage on the driveway but topped it up and headed back over to the specialist as I was going there anyway to pick up a trickle charge and wiper.
Simply put the water was getting in the engine and mixing with the oil, on a visual inspection this showed the 'mud' when mixing occurs, the temp had also dropped to the low 80C on the way over, we can only assume this had began the w/e before but didn't show up in the engine at that time.
This was most certainly HGF, even I knew there was an issue so left her there and the misses picked me up, not too happy to say the least!
She was inspected on the Mon and I was told that the silicone between the head and engine had split and the water was seeping into the engine. By the mid Tues she was back together and being flushed with new steel pins and the required upgrades, I was advised that the engine had not been damaged and the head did not need skimming although the silicone on a giant razor shaped wafer thin piece of metal was split??? (How else do I describe something I don’t know the description of?). It had split in a centre circular area, if that’s any use?
Since having her back there have been no problems and the engine sounds so much sweeter after taking her for a spin yesterday.
I can only assume it was HGF and I have no reason not to believe the mechanic who has been more than helpful on every question a newbie can ask…
Just gutted it happened within a month of buying her as I was planning to take her to Snett the following day... ho hum.
These things happen,just glad I made sure I had that slush fund ready!
Regards,
Lee
Firstly it was a private purchase… doh!
I have also got the AA cover as suggested by sWorks, I think? but just wanted her back on the road asap and didn’t want to risk taking her out again just to see if they would pay up after taking out the policy so soon.
The previous week I had lost most of the water in the reservoir. I had taken her in and had her checked out at my local specialist FOC who has looked after the car for 5 years prior to my purchase.
Oil, hoses, rad, temp etc. all checked but this didn’t show up anything apart from a slightly loose hose. The diagnosis was a suspected air bubble in the rad so the valve was tweaked, a little air came out and it was assumed it may have resolved itself. Everything was topped up and all seemed OK, even when the fan kicked in, spot on 102C, the only issue was that the 2 temp sensor readings were approx 5C out from one another but nothing worth changing so after a coupe of hours I took the long journey home and that was that…
I didn’t get near her until the following Sat… before doing anything I checked her over and the reservoir was virtually empty so again. Had no spillage on the driveway but topped it up and headed back over to the specialist as I was going there anyway to pick up a trickle charge and wiper.
Simply put the water was getting in the engine and mixing with the oil, on a visual inspection this showed the 'mud' when mixing occurs, the temp had also dropped to the low 80C on the way over, we can only assume this had began the w/e before but didn't show up in the engine at that time.
This was most certainly HGF, even I knew there was an issue so left her there and the misses picked me up, not too happy to say the least!
She was inspected on the Mon and I was told that the silicone between the head and engine had split and the water was seeping into the engine. By the mid Tues she was back together and being flushed with new steel pins and the required upgrades, I was advised that the engine had not been damaged and the head did not need skimming although the silicone on a giant razor shaped wafer thin piece of metal was split??? (How else do I describe something I don’t know the description of?). It had split in a centre circular area, if that’s any use?
Since having her back there have been no problems and the engine sounds so much sweeter after taking her for a spin yesterday.
I can only assume it was HGF and I have no reason not to believe the mechanic who has been more than helpful on every question a newbie can ask…
Just gutted it happened within a month of buying her as I was planning to take her to Snett the following day... ho hum.
These things happen,just glad I made sure I had that slush fund ready!
Regards,
Lee
Capt Cave Man said:
although the silicone on a giant razor shaped wafer thin piece of metal was split??? (How else do I describe something I don’t know the description of?). It had split in a centre circular area, if that’s any use
Regards,
Lee
Regards,
Lee
That'll be your head gasket then
, sorry.Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


