GT2 - Front Central Radiator Protective Grill?
Discussion
Right, what you can do is buy the metal grill, (would buy Black), you cut the shape of the area you are going to fill plus another 1" to 2" extra, you buy some fibreglass P?? (can't remember number, lol) and you fit the grill over the area and apply fibreglasss compound all around the edge of the grill, this way it bonds to your front bumper/spoiler, don't apply to much, as you will most likely want to remove if selling! but it does work!
I have done mine with black mesh bought from a car accessory shop.
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
jj996 said:
I have done mine with black mesh bought from a car accessory shop.
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
Any chance of a couple of pics?
C.
cableguy said:
jj996 said:
I have done mine with black mesh bought from a car accessory shop.
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
Any chance of a couple of pics?
C.
Cableguy - send me your email address and I will send you a picture - As I am not sure how to post piccies on the website.
jj996 said:
cableguy said:
jj996 said:
I have done mine with black mesh bought from a car accessory shop.
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)
Any chance of a couple of pics?
C.
Cableguy - send me your email address and I will send you a picture - As I am not sure how to post piccies on the website.
Done. Muchos Gracias.
C.
drhildr said:
Having just taken another stone strike (and subsequent repair cost with my OPC)in the central radiator I am now wondering if anyone has made a protective mesh or grill to help overcome this expensive problem? Any pointers?
I spoke again today about this with OPC Cambridge, my GT3 is taking some real hits (previously posted a reply about this as I had purchased some from Carnewal and had sprayed up to match and wanted to fit) They said that there was no listing of parts for GT3, I guess also GT2, for protective grills and could not get into the motorsport site to see what the Carrera cups have, which they do. He suggested that Reading be made aware of the problem if there are a lot of owners concerned. I mentioned this site and that there are a lot of us, are porsche that naive (cannot believe so) that something is urgently needed?
964RS said:
I'm off out this afternoon to buy some mesh for my GT3 as having both end radiators replaced tomorrow.
Can anyone recommend where to get the mesh???
Stuff at Halfords pimp my ride section looks rubbish!
Can anyone recommend where to get the mesh???
Stuff at Halfords pimp my ride section looks rubbish!
I am currently trying to source some pukka hexagonal stuff.
Should have it by Monday. Will let you know.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff



you were the original poster...