Removing front mesh (S2 Exige)
Removing front mesh (S2 Exige)
Author
Discussion

21TonyK

Original Poster:

13,414 posts

240 months

Monday 30th April 2007
quotequote all
Is there a way of removing the mesh grille on the front of an S2 Exige without the clam coming off? (must be?)

Need to get to the towing mount for some cosmetics.

Cheers

S Works

10,166 posts

281 months

Monday 30th April 2007
quotequote all
Not 100% sure but I guess it will involve getting the front undertray off so you can get behind the grill? Worst case scenario it's going to be bolted/bonded to the clam.

Given that it's a Lotus, the likelihood of the latter being the correct guess is probably quite high

edp190

336 posts

240 months

Monday 30th April 2007
quotequote all
I had my grills replaced under warranty and it was a clam off job! :-(

architect1

10 posts

272 months

Monday 30th April 2007
quotequote all
I asked for my towing eye to be cosmetically sorted last time it was in the dealers but they whined saying it was a clam off job..blah blah. I would be interested if there is a way to resolve it but I reckon even if you took the undertray off you might not be able to do anything in that area.

Wait and see if anyone has ideas?

21TonyK

Original Poster:

13,414 posts

240 months

Monday 30th April 2007
quotequote all
All I want to do is spray the bottom of the tow-eye mount as the nuts are rusty etc which I assume is the problem most people have.

If not possible to remove the grille I may try masking up the clam and smearing the grille itself with vaseline then spraying through it. in theory the paint can't stick to the grille itself and the vaseline washes off.

jez_s

33 posts

269 months

Monday 30th April 2007
quotequote all
I wonder if you could use one of those nozzles that has a straw with it.If you're only spraying your nuts (so to speak!!) it would be a bit more controlled...just an idea.

Jez

111KAB

234 posts

237 months

Monday 30th April 2007
quotequote all
My towing eye bracket just renewed under warranty after some 'discussion' with Lotus. I had the new bracket powder coated locally as quality from Lotus was hopeless. Unfortunately clam off job as mesh grille is bonded to clam.
111KAB