Advise please.
Discussion
Just had my rear window replaced by Willie Ramsay in Edinburgh who has worked on many TVR’s. The problem is the new window seems a lot thinner that my previous one and subsequently marks VERY easily when putting the rear section down! When I say ‘mark’ I mean it takes a good couple of days for the ripples and indentations to disappear! The new window also has a lot more movement to it compared to the last one and looks really messy after having the roof down! Has anyone else had thier rear window replaced and experienced the same thing?
Advise, comments welcome.
Cheers
Neil.
Advise, comments welcome.
Cheers
Neil.
Pity none of the mohair hood manufacturers have made a hood with a zip-out rear screen - would mean an end to creases and would give the option of some ventilation with the hood up.
My TR6 has a zip-out rear screen and it works really well - just wish I could get one for the Griffith.
Jay
My TR6 has a zip-out rear screen and it works really well - just wish I could get one for the Griffith.
Jay
im said:
Cant help noticing that it looks like at some point your screen has been severely "pinched" by the roof stays.
Do you use a towel or anything to protect the screen when dropping it down?
Do you use a towel or anything to protect the screen when dropping it down?
Yes everytime! I'm more concerned about the ruffled effect around the left/right side of the window ... it's almost like there is far too much flex in the window (i.e not tought enough).
TVR Thomo said:
im said:
Cant help noticing that it looks like at some point your screen has been severely "pinched" by the roof stays.
Do you use a towel or anything to protect the screen when dropping it down?
Do you use a towel or anything to protect the screen when dropping it down?
Yes everytime! I'm more concerned about the ruffled effect around the left/right side of the window ... it's almost like there is far too much flex in the window (i.e not tought enough).
are you undoing the velcro fully on the hood near the doors - if not this can cause the window to not fold "nicely" at the ends.
FunkyGibbon said:
TVR Thomo said:
im said:
Cant help noticing that it looks like at some point your screen has been severely "pinched" by the roof stays.
Do you use a towel or anything to protect the screen when dropping it down?
Do you use a towel or anything to protect the screen when dropping it down?
Yes everytime! I'm more concerned about the ruffled effect around the left/right side of the window ... it's almost like there is far too much flex in the window (i.e not tought enough).
are you undoing the velcro fully on the hood near the doors - if not this can cause the window to not fold "nicely" at the ends.
Yes I always undo the velcro and i'm always very careful about putting the hood down. I never had this problem with my old window? Is it possible to get the original rear windows from TVR? It would mean paying the guy (or not) to put it in for me but i'm concerned that if this is what the window is like after only a few weeks what will it be like after a number of month during the summer!?!
TVR Thomo said:
Thanks Andy but I still feel that mine is a lot worse than that! My last window was more like yours. Thanks for the pics anyway mate !
Like I said, it's very hot here today, especially inside the car with the roof up. Normally it looks like yours. I think in its previous life it was left folded down for some time and that's what made the creases permanent.
TVR Thomo said:
FunkyGibbon said:
TVR Thomo said:
im said:
Cant help noticing that it looks like at some point your screen has been severely "pinched" by the roof stays.
Do you use a towel or anything to protect the screen when dropping it down?
Do you use a towel or anything to protect the screen when dropping it down?
Yes everytime! I'm more concerned about the ruffled effect around the left/right side of the window ... it's almost like there is far too much flex in the window (i.e not tought enough).
are you undoing the velcro fully on the hood near the doors - if not this can cause the window to not fold "nicely" at the ends.
Yes I always undo the velcro and i'm always very careful about putting the hood down. I never had this problem with my old window? Is it possible to get the original rear windows from TVR? It would mean paying the guy (or not) to put it in for me but i'm concerned that if this is what the window is like after only a few weeks what will it be like after a number of month during the summer!?!
I've only recently had mine replaced, I'll take a few photos to see if it is the same as yours.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff







