Discussion
Firstly i would like to say hello, I have just purchased my first elise after many long hours looking though info on here and many other sites.
I decided on the series 2 as it seemed to be the more refined option. And have to say after just over a week of owning the car i am more than impressed.
After the intial drama of having the alternetor go on my first propper run out. Everything seems fine with one exception. I believe that a weak point on the car can be HGF (it is a 125hp k series S2). As i am heavily involved in motor sport so this in its self doesnt really concern me. However would like to do what ever i can to prevent it having such a failure.
What i have noticed is that car seems to let its self go up from its normal running temp (on mine about 87 degrees) to about 104 degrees when sat at the lights when driving through town. As far as i am aware the optimum running temp of any petrol engine is about 90 and this is where most engine components are happy. I beleive the ECU has been set by lotus to kick in the coolant fans at about 106 degrees. I have not let mine get to that yet as i have thus far either stopped the engine or found a way of moving on.
What i was thinking was maybe fit my own coolant fan overide switch ( as all i would need to do is tap into the earth that the ecu provides to operate the fan relay) to turn on the coolant fans as i am pulling up to the lights or traffic then simply turn them off as i move. Just wondering if anyone has done this and if so what effect it had??
Regards Chris
I decided on the series 2 as it seemed to be the more refined option. And have to say after just over a week of owning the car i am more than impressed.
After the intial drama of having the alternetor go on my first propper run out. Everything seems fine with one exception. I believe that a weak point on the car can be HGF (it is a 125hp k series S2). As i am heavily involved in motor sport so this in its self doesnt really concern me. However would like to do what ever i can to prevent it having such a failure.
What i have noticed is that car seems to let its self go up from its normal running temp (on mine about 87 degrees) to about 104 degrees when sat at the lights when driving through town. As far as i am aware the optimum running temp of any petrol engine is about 90 and this is where most engine components are happy. I beleive the ECU has been set by lotus to kick in the coolant fans at about 106 degrees. I have not let mine get to that yet as i have thus far either stopped the engine or found a way of moving on.
What i was thinking was maybe fit my own coolant fan overide switch ( as all i would need to do is tap into the earth that the ecu provides to operate the fan relay) to turn on the coolant fans as i am pulling up to the lights or traffic then simply turn them off as i move. Just wondering if anyone has done this and if so what effect it had??
Regards Chris
Hi and welcome.
The temps you note are normal for a K-series running in traffic on a hot day. Not sure on an S2 but on the S1 the fan should kick in at ~102deg and then bring the temp down to stabilise. If that's not happening you could have a duff fan, or a duff temp sensor. IIRC you can test if the fan's working by pulling out one of the temp senders and it should start automatically...
You shouldn't need to fit an override switch though.
As for HGF, it's generally caused by thermal shock, so not a great deal you can do other than warm up the car carefully before ragging it or if you wish, fit a remote thermostat.
Plenty of info on the SELOC techwiki... http://wiki.seloc.org/a/SELOC_TechWik
The temps you note are normal for a K-series running in traffic on a hot day. Not sure on an S2 but on the S1 the fan should kick in at ~102deg and then bring the temp down to stabilise. If that's not happening you could have a duff fan, or a duff temp sensor. IIRC you can test if the fan's working by pulling out one of the temp senders and it should start automatically...
You shouldn't need to fit an override switch though.
As for HGF, it's generally caused by thermal shock, so not a great deal you can do other than warm up the car carefully before ragging it or if you wish, fit a remote thermostat.
Plenty of info on the SELOC techwiki... http://wiki.seloc.org/a/SELOC_TechWik
Thnk you very much for the quick reply guys. To be honnest i think that i will feel much better about the car once its not going up to 106 when stopped. I cant see any reason why the temp should ever need to reach this. Have had a look at the gizmo that is supplied by elise parts and yeh it looks like it does the job. The only problem i have is that i have just finished a masters degree and also bought a house so have really stretched myself over the next few months in terms of money and would like a cheap easy fix for the mean time. Has been well worth the financial over stretch so far though. Any more advice/views would be greatly appriciated.
Cheers chris
Cheers chris
R2Dn00b said:
I was at peninsula Lotus last week, my friend had a leaky radiator and the engineer there didnt understand why the fan cut in at such a high temp. He said that if he owned a 111S he would fit an over-ride switch allowing him to cut the fan in at a much lower temperature. He said it was easy in theory but in reality it would be quite a pain to retro fit.
Surprised to hear a comment like that from an engineer at a Lotus specialist.
Take your car along the A30 to the South West Lotus Centre. Independant specialist who really know their Elises.
If your handy with electrical work you could do that for a few quid. Take the wire after the fuse in your fusebox. Run it via the battery with a switch in the line somewhere. Will only cost you a few quid for the switch and because you left the fuse in line youll have a safety built in. I think thats all there is to it
Nope, should work fine. You can also run wires directly from the fan via the battery to a switch, and fit a new in line fuse.
I'm not sure it is necessary, though. If the fan cuts in and reduces the temperature, it is doing its job.
A manual override will need to be monitored just as much in reverse, as you don't want to forget it is on and floor the gas with 70 degrees or so on the Stack.
I'm not sure it is necessary, though. If the fan cuts in and reduces the temperature, it is doing its job.
A manual override will need to be monitored just as much in reverse, as you don't want to forget it is on and floor the gas with 70 degrees or so on the Stack.
I have been having a bit of a look at the wiring diagram for the car. The process looks pretty simple really. The ECU provides an earth for the coolant fan relay with is switched by the ECU at the pre-set temp. Therefor all that would need to be done is splice into that earth feed somewhere ( i think pin 67, first pin of row three of the smaller connector for S2 and pin 6 for the S1 on the ECU conector side) and earth that feed. Took the car out last night when i was feeling brave and just let it run as i drove through town and to be honnest it was fine, how ever i had been driving like a big girl before hand.
I think i may still stick a push to make switch maybe on the wheel for times when i get a bit worried about it in hot weather as it seems very easy to do.
With regards the observation made about remembering to turn it of, as long as you put a push to make in rather than a rocker or latch switch you should be fine. As when you take your finger of the switch it cuts the fan.
I think i may still stick a push to make switch maybe on the wheel for times when i get a bit worried about it in hot weather as it seems very easy to do.
With regards the observation made about remembering to turn it of, as long as you put a push to make in rather than a rocker or latch switch you should be fine. As when you take your finger of the switch it cuts the fan.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


