still no f....ing fan
Discussion
hello everyone,thanks for all the help re my fans,ihave learned a lot from you all but still no ns fan.To recap os fan comes on at 92.ns fan does not work even at 100 it used to work at 96.I removed sensor wires and turned engine on but still onlyos fan comes on,nsdoes not come on.I have swapped relays and changed fuses but still only os fan works. The fan is not seized ,please help, any more ideas?Now going slightly mad Simon!!!!!!!
Mmm ...
1. Engine running, disconnect sensor and only one fan fires up
2. All fuses relays checked/swapped
3. Assuming temp read-out is correct - can you reach a temp that causes the expansion cap to vent?
So,
4. Have you tried swapping the connectors around - they are part of the loom behind the fans?
5. Also try disconnecting or removing relay/fuse from working fan and see if this forces the 2nd fan on - obviously turn off before it starts to boil.
Stumped, otherwise
Martin
1. Engine running, disconnect sensor and only one fan fires up
2. All fuses relays checked/swapped
3. Assuming temp read-out is correct - can you reach a temp that causes the expansion cap to vent?
So,
4. Have you tried swapping the connectors around - they are part of the loom behind the fans?
5. Also try disconnecting or removing relay/fuse from working fan and see if this forces the 2nd fan on - obviously turn off before it starts to boil.
Stumped, otherwise
Martin
Thanks again Martin,I will try swapping the connectors around,are they the obvious white rectangular plastic connectors situated behind the fans?I wont have time to play with them till next week now,but a trip out tonight to my local Aston club meeting has put the smile back on my face,even if Trev did get a little hot putting him back in the garage. Cheers Simon
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


