Wireless Problems (Linksys WRT54G wireless router)
Discussion
Ok people wonder if anyone can help ...
i am on telewest 10mb ... if i use it straight into ethernet i get the full 10mb no problems
however i use a linksys WRT54G wireless router - when downloading via it the download maxs out at around 500-600 kbps ...signal is no issue router is 10 cms from laptop
anyone any ideas ? or remedies its doing my head in.
R
i am on telewest 10mb ... if i use it straight into ethernet i get the full 10mb no problems
however i use a linksys WRT54G wireless router - when downloading via it the download maxs out at around 500-600 kbps ...signal is no issue router is 10 cms from laptop
anyone any ideas ? or remedies its doing my head in.
R
So on wired you see 1MB/s download and on WiFi you see 5 - 6Mb/s. Ok.
Open up cmd (I'm assuming your a Windows bod).
type "ping -c 100 www.google.com"
Let it trundle through and eventually it will display a summary. If the packet loss is exceptionally high then bin the router and get another.
Make sure you laptop and the router are working at 802.11G speeds (54Mbps), if it's fluctuating wildly try updating the drivers for your wifi card, flashing the router to the newest firmware and changing the channel the router is operating on.
Even assuming you're running with max security turned on (WPA) and allowing for that speed hit a 54Mbps wifi link will outpace a 10Mbps inet link.
Open up cmd (I'm assuming your a Windows bod).
type "ping -c 100 www.google.com"
Let it trundle through and eventually it will display a summary. If the packet loss is exceptionally high then bin the router and get another.
Make sure you laptop and the router are working at 802.11G speeds (54Mbps), if it's fluctuating wildly try updating the drivers for your wifi card, flashing the router to the newest firmware and changing the channel the router is operating on.
Even assuming you're running with max security turned on (WPA) and allowing for that speed hit a 54Mbps wifi link will outpace a 10Mbps inet link.
Not familiar with the telewest service, but I use the same wireless router. When you say "straight into ethernet" do you mean you've tried using an ethernet port on the back of the WRT54G router (i.e. Telewest > WRT54G "Internet" port, then either WRT54G's "1" to "4" ports > Computer's ethernet.) If that is working OK, then you at least know it's a a wireless issue.
ThePassenger said:
So on wired you see 1MB/s download and on WiFi you see 5 - 6Mb/s. Ok.
Open up cmd (I'm assuming your a Windows bod).
type "ping -c 100 www.google.com"
Let it trundle through and eventually it will display a summary. If the packet loss is exceptionally high then bin the router and get another.
Make sure you laptop and the router are working at 802.11G speeds (54Mbps), if it's fluctuating wildly try updating the drivers for your wifi card, flashing the router to the newest firmware and changing the channel the router is operating on.
Even assuming you're running with max security turned on (WPA) and allowing for that speed hit a 54Mbps wifi link will outpace a 10Mbps inet link.
Open up cmd (I'm assuming your a Windows bod).
type "ping -c 100 www.google.com"
Let it trundle through and eventually it will display a summary. If the packet loss is exceptionally high then bin the router and get another.
Make sure you laptop and the router are working at 802.11G speeds (54Mbps), if it's fluctuating wildly try updating the drivers for your wifi card, flashing the router to the newest firmware and changing the channel the router is operating on.
Even assuming you're running with max security turned on (WPA) and allowing for that speed hit a 54Mbps wifi link will outpace a 10Mbps inet link.
Security is WEP and yeah if i go straight from the modem to my laptop / desktop i get downloads of 1mb/sec without a problem , if i use the wirless i get 500-600 kbps max
done the ping , packet loss seems ok there was 0% lost and ping speeds were around 31 ms
i downloaded the latest firmware last nite , will upload that to the router 2 nite
R
ATG said:
Not familiar with the telewest service, but I use the same wireless router. When you say "straight into ethernet" do you mean you've tried using an ethernet port on the back of the WRT54G router (i.e. Telewest > WRT54G "Internet" port, then either WRT54G's "1" to "4" ports > Computer's ethernet.) If that is working OK, then you at least know it's a a wireless issue.
What i meant was when i remvoe the router and run the modem via ethernet straight to my desktop / laptop i get the full speed , when i run it via the router i get 500 - 600 kbps downloads
R
Ross_ said:
ATG said:
Not familiar with the telewest service, but I use the same wireless router. When you say "straight into ethernet" do you mean you've tried using an ethernet port on the back of the WRT54G router (i.e. Telewest > WRT54G "Internet" port, then either WRT54G's "1" to "4" ports > Computer's ethernet.) If that is working OK, then you at least know it's a a wireless issue.
What i meant was when i remvoe the router and run the modem via ethernet straight to my desktop / laptop i get the full speed , when i run it via the router i get 500 - 600 kbps downloads
R
OK. Have you tried attaching your computers to the router via ethernet?
Still no further forward now on 20mb ... and still on wireless i only get 600 kb.sec max downloads ... however i can download the same file and get 2000 kb/sec + when i use a straight wired connection
have updated the firmware ... still none the wiser , have changed wireless channels still the same ... at a loss now :S
any help appreciated
R
have updated the firmware ... still none the wiser , have changed wireless channels still the same ... at a loss now :S
any help appreciated
R
Ross_ said:
Still no further forward now on 20mb ... and still on wireless i only get 600 kb.sec max downloads ... however i can download the same file and get 2000 kb/sec + when i use a straight wired connection
have updated the firmware ... still none the wiser , have changed wireless channels still the same ... at a loss now :S
any help appreciated
R
have updated the firmware ... still none the wiser , have changed wireless channels still the same ... at a loss now :S
any help appreciated
R
If he's on 802.11b at 11mb that has a 50% (ish) overhead so you only get a 5.5Mb actual useable throughput which might explain the numbers...
Sean
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


