GOOBY - Lightweight Flywheel
GOOBY - Lightweight Flywheel
Author
Discussion

Stewart Rush

Original Poster:

93 posts

237 months

Thursday 3rd May 2007
quotequote all
Gooby,

I did a search and found at some point you were thinking about installing a lighter flywheel....Did you ever go through with it?

Cheers

Stewart

Gooby

9,269 posts

265 months

Thursday 3rd May 2007
quotequote all
Nope, I didnt. It was a idea while the engine was out. There are a few reasons why not. Money - I was facing a huge bill for a re-build which in the end Lotus covered. Timescales - The car had already been off the road for 6 weeks and I didnt want to wait any longer. On closer inspection the flywheel is very light, I would have had to get a light flywheel and it didnt seem feasable to lighten and balance the existing wheel, which would mean the entire bottom end out as the flywheel is matched and ballanced to the entire bottom end. There would have also been warranty implications and ECU implications.

All of which I regret.

Please remember that this is not a easily replaceable part, as the engine is quite highly revving the new lightened flywheel has to be ballanced to the bottom ent of the engine otherwise you could do a hell of a lot of damage. If you have the engine out and you are doing a large scale rebuild, then DO IT, I would love to know the results.

Fensport do the lighter flywheel.....

Stewart rush

Original Poster:

93 posts

237 months

Thursday 3rd May 2007
quotequote all
Thanks for that.

Couple of months ago Miles at Fibregalss Serivces in Arundle agreed to fit an organic race clutch and lightweight flywheel to my 111r. The kit has now arrived in the UK so I just have to book it in and weight

I believe the standard Flywheel is 6kg and the LW is coming in at 4.5kg, saving 25%.

Watch this space.

Cheers

Stewart

Gooby

9,269 posts

265 months

Thursday 3rd May 2007
quotequote all
Stewart rush said:
Thanks for that.

Couple of months ago Miles at Fibregalss Serivces in Arundle agreed to fit an organic race clutch and lightweight flywheel to my 111r. The kit has now arrived in the UK so I just have to book it in and weight

I believe the standard Flywheel is 6kg and the LW is coming in at 4.5kg, saving 25%.

Watch this space.

Cheers

Stewart

Any details on the kit?

toxic frog

3,227 posts

298 months

Thursday 3rd May 2007
quotequote all
the combination of a lightened flywheel, cr box and short-shift should get you as close to a race-car gearshift as you're going to get this side of major wallet-bashing.

Stewart rush

Original Poster:

93 posts

237 months

Thursday 3rd May 2007
quotequote all
Sorry Gooby,

Can't give any details of the Kit at the moment. I'm working with the, soon to be, UK distributor. Understandably he doesn't want to let any details out until we've installed the kit and started testing.

We know the clutch is ok as the Americans have been using it to upgrade their Toyota's for a while. The Flywheel is a different matter. Its just been developed and 'oh shite' hasn't been fitted to an Elise as yet as far as I know it's the only one.

I'll post up as soon as I have any details.

Cheers

Stew

Tina K

22,031 posts

243 months

Friday 4th May 2007
quotequote all
I've been interested in this as I know that TRD offer the part. Fortunately my clutch is still hanging in there, so no need as yet. 'Middo' on Seloc had one on his S160 and thought it was a good mod. Let us know how you get on with it.

Stewart rush

Original Poster:

93 posts

237 months

Friday 4th May 2007
quotequote all
Tina K said:
I've been interested in this as I know that TRD offer the part. Fortunately my clutch is still hanging in there, so no need as yet. 'Middo' on Seloc had one on his S160 and thought it was a good mod. Let us know how you get on with it.


I'll be stripping the Elise down tonight to start the real work first thing tomorrow morning...God I hope it goes well

Will keep you all informed

Cheers

Stewart


Edited by Stewart rush on Friday 4th May 13:33

Stewart Rush

Original Poster:

93 posts

237 months

Tuesday 8th May 2007
quotequote all
OK, all done!

This weekend I fitted new upgraded clutch and a lightweight Flywheel. The clutch feels very good and with the LW FY the engine is much, much more responsive!!!

Pig of a job for a DIY'er but got there in the end.

Cheers

Stewart

Phil-Ch

1,132 posts

295 months

Tuesday 8th May 2007
quotequote all
Excellent news I'm looking forward to a lightweight flywheel as well once the original clutch wears out and can be replaced by a sintered clutch...

Stewart Rush

Original Poster:

93 posts

237 months

Tuesday 8th May 2007
quotequote all
This is my old one, some big lump of steel which weighed in a 6kg:



and I fitted this yummy thing which weighed in at3.97kg!






Cheers

Stewart



Edited by Stewart Rush on Tuesday 8th May 12:35