REPAIRING FRONT SPLITTER DAMAGE
REPAIRING FRONT SPLITTER DAMAGE
Author
Discussion

rhy 11s

Original Poster:

78 posts

248 months

Thursday 3rd May 2007
quotequote all
I'm after some advice on basic fibreglass repair work.... I recently fitted an Eliseparts splitter and within a week I had scraped and bashed it on the speedhumps at work! It's pretty easy to sand down, which I think I will do, but I'm unsure what to use to:

1) Fill the small chips to the paintwork where paint has been pulled off as I've scraped the floor - now leaving white fibreglass exposed.

2) Sealing the bottom where I'm going to sand it down.

3) Painting the repairs - I'm not fussed about it being perfect as it's not part of the main bodywork and the car is black, so as long as I can turn the white bits black then I'll be happy!

Any help would be much appreicated, thanks!

S Works

10,166 posts

281 months

Thursday 3rd May 2007
quotequote all
Shangani has done a fair few home repairs, drop him a u2u about this thread and I'm sure he'll be pleased to share his thoughts when he has a moment free.

I'd be interesting in hearing this as I have a couple of small holes under the front clam I'd like to clean up since my reverie splitter and the front clam parted company at Donington.

rhy 11s

Original Poster:

78 posts

248 months

Thursday 3rd May 2007
quotequote all
That sounds nasty. Don't suppose you know how the Reverie splitter compares to the Eliseparts fibreglass in terms of ground clearance???

S works

10,166 posts

281 months

Thursday 3rd May 2007
quotequote all
rhy 11s said:
That sounds nasty. Don't suppose you know how the Reverie splitter compares to the Eliseparts fibreglass in terms of ground clearance???

No idea. What I will say though is make sure you have some nice big washers to spread the load above, and below the mounting points.

shangani

3,069 posts

268 months

Thursday 3rd May 2007
quotequote all
rhy 11s said:
That sounds nasty. Don't suppose you know how the Reverie splitter compares to the Eliseparts fibreglass in terms of ground clearance???


They are the same.

As for repairs - you need fibreglass paste, sandpaper and black spraypaint (assuming your splitter isn't body colourd. Fixing is fairly easy.

rhy 11s

Original Poster:

78 posts

248 months

Friday 4th May 2007
quotequote all
Cheers Shangani. Any recommendations on the fibreglass paste? And where to buy? Halfords? Thanks.

shangani

3,069 posts

268 months

Friday 4th May 2007
quotequote all
The Halfrauds stuff is fine. Try to colour match a spray aerosol to the type of black on the splitter. (also halfords). If the splitter is body coloured, many paint shops will do lotus colours in aerosol form. I would not bother fixing inderneath the splitter - just the areas that show. They do get a pounding, so repairs will be frequent.

bjc388

459 posts

255 months

Friday 4th May 2007
quotequote all
Shangers ... I see a nice little part time business opportunity m8 ... ...

I mend on humans by day and mend Lotus's by night - www.fibreglass-repairs-4U.com yes

shangani

3,069 posts

268 months

Friday 4th May 2007
quotequote all
Hi BJ - Must catch up with you properly soon.

It certainly felt like I am in the repair business - repairs to Rob's car (quick and easy) as well as nickduce's diffuser that needed a new bracked where the fibregass had broken off. Still, I had a very pleasant natter to nick (and later Rob) on a day that would have been spent on trivial things otherwise.