rear shocks
Author
Discussion

ss29

Original Poster:

42 posts

235 months

Friday 4th May 2007
quotequote all
my rear shocks are dead in my 99 s1 elise. i want to keep it pretty much a standard set up, any sugestions what replacements i should use and where to get them from ?

Paul RN

1,168 posts

245 months

Friday 4th May 2007
quotequote all
A set of red konis from ebay or the lotus parts classifieds on here. You can get a set of LSS for around 250 which will give you adjustable ride height.

Paul RN

1,168 posts

245 months

Friday 4th May 2007
quotequote all
The ones I was thinking of have sold www.pistonheads.com/sales/161950.htm but keep looking

srob

12,567 posts

269 months

Friday 4th May 2007
quotequote all
I've just replaced the Koni's on my S1 with the S2 Bilstein upgrade kit. It's a bit pricier than the Koni's, but it makes one hell of a diference.

Guess this would only be applicable if you're thinking of changing all four though- have the fronts already been replaced?


Edited by srob on Friday 4th May 23:27

tin hat

1,430 posts

240 months

Friday 4th May 2007
quotequote all
I note that you are keen to avoid a major change,but the upgrade to Nitrons was a revelation to my S1!

ss29

Original Poster:

42 posts

235 months

Monday 7th May 2007
quotequote all
The main reason i don't want to stray from the standard set up , is because i live and drive in a rural area ant the roads are awfull, so lowering is out of the question, and with that i don't want to go much harder, but the brand or quality i'm willing to change

TheYeti

656 posts

247 months

Monday 7th May 2007
quotequote all
ss29 said:
The main reason i don't want to stray from the standard set up , is because i live and drive in a rural area ant the roads are awfull, so lowering is out of the question, and with that i don't want to go much harder, but the brand or quality i'm willing to change



You won't be going much lower (at most, 10mm and depending on your standard set up, you might not be going lower anyway!) and also, the S2 kit is an official Lotus kit that THEY themselves recommed that S1 drivers do. Apparantly the ride is better and the handling is not affected in anyway. I have just bought my kit from the group buy over on Seloc for £450 and I cannot wait to put them on. It WILL be standard, don't worry. Just not the original Koni's thats all. But still the kit that Lotus made and recommend, so you won't be straying from standard much, if at all.........well worth it and one I would recommend highly you do. I had very much the same reservations as you, but reading so much about how good the kit is and what it does, I couldn't NOT go that way in the end........

Paul RN

1,168 posts

245 months

Monday 7th May 2007
quotequote all
Theres a set of red konis for an S1 on SELOC classifieds for £100.

S Works

10,166 posts

281 months

Monday 7th May 2007
quotequote all
Change to S2 Bilsteins all round with one of SteveB's kits for your chosen ride height. Far, far better than Koni's, especially if your local roads aren't the greatest.

fatwomble

1,389 posts

245 months

Monday 7th May 2007
quotequote all
I've got a set of Konis sitting in the shed that I was going to put on ebay if you are interested. The rears had only done about 8 - 10,000 miles. Rears only for £30 or £50 for the lot.

Not sure how much they would cost to post as they weigh a fair bit.

Email me if interested.