Can you fit 4 Wheels in a Griff?
Discussion
Yes it is entirely possible provided the fronts are 205 and not 225.
The fronts will go in the boot, you need to load one, move it to one side and place at a slight angle, then you can just get the second one in, once in there is a fair bit of room left for other stuff. Next put the fronts in plastic bags and take the roof off. Place something protective on the rear shelf ( an old blanket ) load one rear and put the roof back ( assuming you want to that is). The Final rear will now sit as if a passenger on the front seat wearing the seat belt
As an alternative and actually quite easy lift out the passenger seat and the two rears will now stand where the seat was.
The fronts will go in the boot, you need to load one, move it to one side and place at a slight angle, then you can just get the second one in, once in there is a fair bit of room left for other stuff. Next put the fronts in plastic bags and take the roof off. Place something protective on the rear shelf ( an old blanket ) load one rear and put the roof back ( assuming you want to that is). The Final rear will now sit as if a passenger on the front seat wearing the seat belt
As an alternative and actually quite easy lift out the passenger seat and the two rears will now stand where the seat was.
steve-V8s said:
Yes it is entirely possible provided the fronts are 205 and not 225.
The fronts will go in the boot, you need to load one, move it to one side and place at a slight angle, then you can just get the second one in, once in there is a fair bit of room left for other stuff. Next put the fronts in plastic bags and take the roof off. Place something protective on the rear shelf ( an old blanket ) load one rear and put the roof back ( assuming you want to that is). The Final rear will now sit as if a passenger on the front seat wearing the seat belt
As an alternative and actually quite easy lift out the passenger seat and the two rears will now stand where the seat was.
The fronts will go in the boot, you need to load one, move it to one side and place at a slight angle, then you can just get the second one in, once in there is a fair bit of room left for other stuff. Next put the fronts in plastic bags and take the roof off. Place something protective on the rear shelf ( an old blanket ) load one rear and put the roof back ( assuming you want to that is). The Final rear will now sit as if a passenger on the front seat wearing the seat belt
As an alternative and actually quite easy lift out the passenger seat and the two rears will now stand where the seat was.
Make sure the tyres are well covered as I ended up with a nasty mark on my passenger door leather from the tyre in the front seat
Gassing Station | Griffith | Top of Page | What's New | My Stuff


