New car!!!
Author
Discussion

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
Well, Ok, no I haven't got a new car, but I have finished fitting the S2 suspension kit........

Took it out for a quick "shake down" on a mile run and even without the geo done (booked in at Horizon for tomorrow) and crap, bald tyres (getting changed on Saturday morning), the transformation is just incredible! There are no crashes, no bangs, no rattles, it rides superbly with a tautness and control that I had forgotten Elise's had and.........well, like the title said, it feels like a brand new car!

GOD knows what its going to feel like after tomorrows geo and new tyres.............I really, really, really can't wait for those first 500 miles to go past on the tyres!

I am grinning from ear to ear pretty much permanently at the moment! Imagine what an inane idiot I am going to look after Saturday!! LOL!!!

garylythgoe

831 posts

253 months

Thursday 10th May 2007
quotequote all
Sounds fantastic, fitted it to an S1 elise 118hp?

noodleman

827 posts

244 months

Thursday 10th May 2007
quotequote all
I'm pleased to hear that mate. I've been toying with the idea of going to S2 suspension but wasn't sure it would be worth the cash as my Konis are still working perfectly.

It sounds like I'll be happy with the result though. My worst fear is spending lots of cash just to remove the odd annoying clunk from the suspension.

How much did it cost all in mate?

Cheers,

Noodle.

ps: I may be going senile but weren't you thinking of selling up recently?

srob

12,567 posts

269 months

Thursday 10th May 2007
quotequote all

I had the same kit fitted to my 118bhp S1 a few months ago. It really does make a diference doesn't it- far more than I had thought it would. The ride is so much more refined. I had it lowered onto the lowest setting last weekend (there's 3 positions on the dampers), so it looks quite mean now and doesn't seem to have adversly altered the road manors.

I can't remember the exact cost (I got the dampers myself through a friend and had them fitted by an indi), but think it's around 600 quid fitted, plus geo if you need it. My Koni's were completely shot, so that kinda made my mind up for me!

BullFace

90 posts

235 months

Thursday 10th May 2007
quotequote all
Will it stop the banging when you hit a bump?

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
garylythgoe said:
Sounds fantastic, fitted it to an S1 elise 118hp?


Yeah, 118bhp Millenium Ed S1. Had original Koni's on before. They really were shot. Had 40K on them. Should have been changed at about 27K!!!

noodleman said:
I'm pleased to hear that mate. I've been toying with the idea of going to S2 suspension but wasn't sure it would be worth the cash as my Konis are still working perfectly.

It sounds like I'll be happy with the result though. My worst fear is spending lots of cash just to remove the odd annoying clunk from the suspension.

How much did it cost all in mate?

Cheers,

Noodle.

ps: I may be going senile but weren't you thinking of selling up recently?


Noodle, you wont regret it. Its not just the noise, but the poise of the car is completely different too. I don't know what its like without a full geo done on it yet, so will see after tomorrow, but at the moment, with original settings, it feels a totally different car.

I got my new suspension through the group buy that was over on SELOC supplied by Bell and Colville for £450 all in (i.e. fully assembled, instructions, bolts and VAT). SteveB is the man on this as he can do various ride heights and so on and he isn't hugely more expensive at that. He is also a thoroughly nice chap to deal with too. But there was a large discount throught the GB, so I went that route and stayed with the standard ride heights that come with those. Its dropped the car by about 10mm and it IS noticable. But it also gives the car a slightly "meaner" look as well as all the other benefits I have mentioned, which I quite like........

The annoying clunk you talk about it the start of the deterioration of the damper too. It will get rapidly worse and you will find that the suspension will start to get very baggy and noisy, rattly and basically rubbish. The Koni's only last about 25-30K miles at most, so if you are approaching anywhere near that, then you are on the slippery downward slope with those. Sorry.......

Oh and they are a DODDLE to replace and change. A 17mm socket, rachet and 17mm ring and open ended spanner were all I needed to do the job. Oh and a jack and a torque wrench......

And yeah, I WAS thinking of selling up, but the car (suspension mainly) was in such a bad state that it would have been unsellable in the state that it was. So I thought it was prudent to get the suspension sorted, the exhaust sorted (in the process of sorting that), new tyres (mine were actually bald!) and the geo, as well as getting it serviced. But, with all this work being done and the total transformation of the car with all this work, I am very seriously thinking of hanging on to it...........I want to enjoy it as it should be!

srob said:

I had the same kit fitted to my 118bhp S1 a few months ago. It really does make a diference doesn't it- far more than I had thought it would. The ride is so much more refined. I had it lowered onto the lowest setting last weekend (there's 3 positions on the dampers), so it looks quite mean now and doesn't seem to have adversly altered the road manors.

I can't remember the exact cost (I got the dampers myself through a friend and had them fitted by an indi), but think it's around 600 quid fitted, plus geo if you need it. My Koni's were completely shot, so that kinda made my mind up for me!


Yeah, I went with the GB and it HAS lowered the ride height. I didn't pay as much as you, but I did the work myself, which saved me a few quid! Lucky my Dad is a retired mechanic and I am relatively handy with a spanner! But the difference, like you said, is amazing.

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
BullFace said:
Will it stop the banging when you hit a bump?



Well, I have gone over a couple so far and its stopped 95% of the banging that was there with the shot Koni's. But its an Elise, so won't get rid altogether.............but I can live with it a DAMN site more than I could before......

srob

12,567 posts

269 months

Thursday 10th May 2007
quotequote all
Yeti, I didn't actually pay that as I was able to source the dampers myself . I think that was the figure quoted when I first started looking- luckily for me mine came out quite a lot cheaper than that (the kidney sale had already been alocated for the cambelt service!!)

I haven't had mine geo'd, I was told that for normal road use it wasn't necessary unless you notice any unusual wear on the tyres as it doesn't really lower it that much. I haven't yet and hopefully I won't!

boobles

15,251 posts

246 months

Thursday 10th May 2007
quotequote all
I was contemplating doing this but the £800 price tag put me off.

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
srob said:
Yeti, I didn't actually pay that as I was able to source the dampers myself . I think that was the figure quoted when I first started looking- luckily for me mine came out quite a lot cheaper than that (the kidney sale had already been alocated for the cambelt service!!)

I haven't had mine geo'd, I was told that for normal road use it wasn't necessary unless you notice any unusual wear on the tyres as it doesn't really lower it that much. I haven't yet and hopefully I won't!


Ah right. Fair enough. I have to get the geo done on mine as the tramlining was quite spectacular sometimes and when looking at the wear on the tyres, its completely out as its very uneven. The drivers side front is still pretty good yet the passenger side front is as bald as my Dad!!!

Now, that kidney sale.......given me a good idea............

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
boobles said:
I was contemplating doing this but the £800 price tag put me off.


Wouldn't be £800. You could do the work yourself (honestly, you really CAN do the work yourself. If I can do it, then any numpty can do it!) and you could source the springs and dampers for about £500. And beleive me, the difference is WORTH £500...............

And like Rob said, if you think your geo is fine, then for road use, you won't need to change it. I am getting mine done cos its way out. So you could save money there too.

I know £500 is a lot money still (I know, I have SOOOOO much to shell out for on this car and I am not exactly flush at the moment), but if you can spare £500 sometime in the future, then its worth it.

talkwrench

910 posts

264 months

Thursday 10th May 2007
quotequote all
Absolutely agree with all that has been said in favour of the S2 suspension on an S1.
I recently fitted a set, along with a quick rack. The transformation really is remarkable. The suspension is considerably more controlled and compliant. Positively comfortable, in fact! The cars behaviour on uneven, ripply surfaces that are so often encountered on fast corners is truly amazing. I whipped off all the underside covers, cleaned them out and refitted them tightly while I was at it. Virtually all the rattles and crashes have completely disappeared. All I hear now is that lovely Larini exaust and a sizzling gearbox!

boobles

15,251 posts

246 months

Thursday 10th May 2007
quotequote all
TheYeti said:
boobles said:
I was contemplating doing this but the £800 price tag put me off.


Wouldn't be £800. You could do the work yourself (honestly, you really CAN do the work yourself. If I can do it, then any numpty can do it!) and you could source the springs and dampers for about £500. And beleive me, the difference is WORTH £500...............

And like Rob said, if you think your geo is fine, then for road use, you won't need to change it. I am getting mine done cos its way out. So you could save money there too.

I know £500 is a lot money still (I know, I have SOOOOO much to shell out for on this car and I am not exactly flush at the moment), but if you can spare £500 sometime in the future, then its worth it.


I couldnt do it myself trust me! I wouldnt even attempt doing it because i know i would mess it up big time.

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
boobles said:
TheYeti said:
boobles said:
I was contemplating doing this but the £800 price tag put me off.


Wouldn't be £800. You could do the work yourself (honestly, you really CAN do the work yourself. If I can do it, then any numpty can do it!) and you could source the springs and dampers for about £500. And beleive me, the difference is WORTH £500...............

And like Rob said, if you think your geo is fine, then for road use, you won't need to change it. I am getting mine done cos its way out. So you could save money there too.

I know £500 is a lot money still (I know, I have SOOOOO much to shell out for on this car and I am not exactly flush at the moment), but if you can spare £500 sometime in the future, then its worth it.


I couldnt do it myself trust me! I wouldnt even attempt doing it because i know i would mess it up big time.


Really? Honestly? Its wheels off, a spanner, a ratchet, two bolts off, two bolts on when putting the new one on, torque it up........DONE! Its really, really IS that simple...........

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
talkwrench said:
Absolutely agree with all that has been said in favour of the S2 suspension on an S1.
I recently fitted a set, along with a quick rack. The transformation really is remarkable. The suspension is considerably more controlled and compliant. Positively comfortable, in fact! The cars behaviour on uneven, ripply surfaces that are so often encountered on fast corners is truly amazing. I whipped off all the underside covers, cleaned them out and refitted them tightly while I was at it. Virtually all the rattles and crashes have completely disappeared. All I hear now is that lovely Larini exaust and a sizzling gearbox!


How has the quick rack changed things? Does it make a big difference cos the standard Elise rack isn't exactly slow.......I am intrigued......

Also, for future reference, is it easy to change? Just in case, you know?

boobles

15,251 posts

246 months

Thursday 10th May 2007
quotequote all
So without sounding really dumb, what parts comes in the upgrade? Im assuming its springs & shocks?

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
boobles said:
So without sounding really dumb, what parts comes in the upgrade? Im assuming its springs & shocks?


Depending on who you go to, you get the brackets for the rears, the bolts, the dampers and the springs. Thats it.

SteveB will send them to you fully assembled with complete fitting instruction (which, when you look at it, you won't need that much as it is that simple). The GB on SELOC where I got mine from also had them fully assembled in the price. Bell&Colville will supply, but I don't think they assemble (except for this GB). But that really IS it. If you get it fully assembled, it will be literally just undoing two bolts, one at top, one at bottom and then replacing them with the new unit and bolts. Thats it!

BullFace

90 posts

235 months

Thursday 10th May 2007
quotequote all
Where can I look for a good price?

boobles

15,251 posts

246 months

Thursday 10th May 2007
quotequote all
Something for me to consider then. Cheers for that. thumbup

TheYeti

Original Poster:

656 posts

247 months

Thursday 10th May 2007
quotequote all
BullFace said:
Where can I look for a good price?


You MIGHT (and its a very small might, but worth a go) get last orders on the group buy on SELOC. If you mail Pure (Paul) on there or if you mail Andy at Bell & Colville and state the SELOC group buy, then you might be able to get on the last orders for that.

If not, then I would try Steve Butts (SteveB) on SELOC. He really IS the man for this kind of thing. See what he reckons........