Changing Brake Pads on S1
Changing Brake Pads on S1
Author
Discussion

jonbrydges

Original Poster:

199 posts

242 months

Thursday 10th May 2007
quotequote all
Hello all,

Wanted to find out how easy this is. Karl at Specialised Paintwork said it's easy enough, but wondered if you guys have any hints and tips.

Was gonna go for EBC Greens all round.

Anywhere I can get these for cheap??

porteouz

123 posts

235 months

Thursday 10th May 2007
quotequote all
http://elise-faq.info/index.php?title

Pretty easy. Easier than most cars ive done

111KAB

234 posts

237 months

Thursday 10th May 2007
quotequote all
Long thread on SELOC slating EBC Greens .... I wasn't impressed when I fitted to my S2 either.
111KAB

S works

10,166 posts

281 months

Thursday 10th May 2007
quotequote all
Jon, don't fit EBC Greens, they don't work too well on the Elise. For similar money get Mintex 1144's - a far better pad for road use that also fair well on the occasional track outing.

I had EBC's on my Sport 160 for about a month and they were dreadful - binned them for the Mintex which were superb.

porteouz

123 posts

235 months

Thursday 10th May 2007
quotequote all
yea i had them too on my s1. Binned them and got pagid rs42. Quality pads but twice the price

Funny you should say they dont work well on an elise. My old car had them and they were dreadfull. Mates car had them and they were dreadfull


Edited by porteouz on Thursday 10th May 21:52

jonbrydges

Original Poster:

199 posts

242 months

Thursday 10th May 2007
quotequote all
Hmmm I sense that the EBC's aren't so good as I thought.

Will look at Mintex ones.

Thanks so far. Further comments welcomed

stu hill

147 posts

247 months

Friday 11th May 2007
quotequote all
http://wiki.seloc.org/a/SELOC_TechWik

this should tell you all you need to know.

Mark B

1,671 posts

296 months

Friday 11th May 2007
quotequote all
As for changing them, absolutely Piece of P**s.... The fronts are about 40 minutes work for both sides and the rears are about the same. The rears, you need a pin punch to knock out the retaining pin from the inner (car inner) edge of the caliper, the hole is about 2mm dianter, stick a pin punch in and knock out the pin. You will need to use a piston retraction tool though to wind in the piston. Front is just an 'R' clip and pull out the retaining pin.... If you've done pads on anything else, the Elise is just as easy.

FWIW - I have Green stuff on the front of mine and standard Mintex on the rear, I think it brakes very well, although the feel is a little wooden, but performance wise it's just fine.... (Having said this, I won't go Green Stuff again, I'll try soemthing else)