Elise S1 Gear Selection Problems
Discussion
In the last couple of days I have been experiencing increasing difficulty in selecting 1st to 3rd gears on my Elise, a situation that becomes worse the further I drive in the car.
I am aware of the red clutch hose problem, which I think my Elise has, but this problem only seems to have occurred since it has been raining heavily down here in the Westcountry; there was no sign of this a week ago, when the weather was much hotter, which seems to contradict this.
Does anyone have any ideas on this?
Many thanks,
Jonathan
I am aware of the red clutch hose problem, which I think my Elise has, but this problem only seems to have occurred since it has been raining heavily down here in the Westcountry; there was no sign of this a week ago, when the weather was much hotter, which seems to contradict this.
Does anyone have any ideas on this?
Many thanks,
Jonathan
Whats the car and mileage?
Info and pictures of the red clutch so you can check if yours has got one
www.elise-faq.info/index.php?title=Gearbox
Info and pictures of the red clutch so you can check if yours has got one
www.elise-faq.info/index.php?title=Gearbox
Not sure - seems OK when the engine is off - ie goes between gears fine, so when you start the engine again it is in gear, even if it is impossible to do this while the engine is running. It also goes into gear on the move more easily if revs are matched as I go up or down the box.
Definitely has the red hose, so I was wondering whether it is possible that water has got into the hydraulic fluid or something similar. It's just odd that it hasn't happened in the heat.
JP
Definitely has the red hose, so I was wondering whether it is possible that water has got into the hydraulic fluid or something similar. It's just odd that it hasn't happened in the heat.
JP
I had something similar a while back - engineer diagnosed the problem as the linkage being rubbish.
I'll try to explain; it is underneath the car where there is a sort of W shape bracket that the gear selector things are connected through. The bits that were meant to hold the things in the W bracket where loose.
Hopefully somebody will be able to explain that a bit better with some technical terms
I'll try to explain; it is underneath the car where there is a sort of W shape bracket that the gear selector things are connected through. The bits that were meant to hold the things in the W bracket where loose.
Hopefully somebody will be able to explain that a bit better with some technical terms
BEP said:
Whilst on clutch problems does anyone have problems popping there's into reverse when the cars warm? Mines a 97 S1 and it's fine when cold but after a run it really hates going into reverse??
I think that the reverse gear issue is a lotus TADTS, or rather it's a Rover TADTS. You've probably worked it out but try selecting first then going to reverse or failing that, push it into reverse, lift and depress the clutch and it should take it.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


