Braided hoses?
Discussion
Just brought some shiny new goodrich hoses from hangar 111 ,Seemed sensible after seeing the rusty ones,Do they really make a differance when doing track work? Also any ideas on brake fluid as 45 quid a litre seemed excessive!!!,And one more thing any ideas on how to revamp rusty suspention parts (cheaply) If this doesnt work then does anyone stock pattern wishbones and drop links etc etc....any help from you pros much appreciated.
Assuming this os for track then braided hoses will give you more feel through the pedals allowing you to get closer to threshold braking. For fluid any DOT4 300 degree dry at £10/litre is fine if you chnage it annually and bleed every 12 track hours. http://wiki.seloc.org/a/Brake_fluid
Yes, my braided hoses did improve the modulation of the brakes at threshold and also the brake pedal travel. However, it's all largely academic as I still can't heel and toe when threshold braking due to excessive brake pedal travel and my small feet. Shangani suggested some fixes though (different pads and a brake bleed), so I'll let you know if that helps!
Rob, I have a 111R (2004). Does it have the same pedal box etc as mine? I find there is far too much play in the pedal before getting some bite. I did read (on SELOC I think) about a way of adjusting the pedal inside the cabin to take out this play. I know the brakes are good but I want more progression over a longer distance not 50% nothing and then 50% all. I have considered braided hoses and new fluid as some say this on its own can help enormously.
As I don't fancy doing the brakes myself is this something my local garage can do quite easily??
As I don't fancy doing the brakes myself is this something my local garage can do quite easily??
For what they cost this would be my next upgrade but it just looks like a bugger of a job to get to the ends closest the clam!
Is there a special knack or tool I can buy to make the mechanics of fixing them in place easier?
FWIW I did a total flush on fluid, changed my pads to Mintex 1144 and adjusted the pedal height slightly. Brakes are far better than they were but H&T is still near impossible
Is there a special knack or tool I can buy to make the mechanics of fixing them in place easier?
FWIW I did a total flush on fluid, changed my pads to Mintex 1144 and adjusted the pedal height slightly. Brakes are far better than they were but H&T is still near impossible

pasthim said:
Rob, I have a 111R (2004). Does it have the same pedal box etc as mine? I find there is far too much play in the pedal before getting some bite. I did read (on SELOC I think) about a way of adjusting the pedal inside the cabin to take out this play. I know the brakes are good but I want more progression over a longer distance not 50% nothing and then 50% all. I have considered braided hoses and new fluid as some say this on its own can help enormously.
As I don't fancy doing the brakes myself is this something my local garage can do quite easily??
As I don't fancy doing the brakes myself is this something my local garage can do quite easily??
I believe the 111R has its own issues because of the servo assistance. My 111S brake initial bite is ok, but the travel is too long to allow heel and toe much beyond about a third of the total available braking force. When I bought my Elise Lotus dealers said that there was some adjustment on the 111R, and they showed me 'before' and 'after'. I still couldn't heel and toe in the R, so bought the 111S instead (sadly I can't change down any other way, as I learnt to H&T when I was 17, and I don't want to either as it makes me cringe when people change down without H&T). I have since spoken to someone in the servicing department at Bell and Colvill who reckons he can get things even better with the brake pedal travel in both S and R. No doubt a specialist such as Plans Motorsport near Guildford may also be able to help. For my specific problem of excess travel in the 111S Shangani (from this forum, he also has a 111S) advised me to bleed the brakes well and fit Pagid R42 brake pads (or Mintex 1144 as a cheaper alternative). I haven't got round to doing either yet, but definitely will be in the near future.
RobM77 said:
21TonyK said:
Are the potential benefits of pedal travel negated by the fact that the R has servo brakes?
I dunno, just asking as it has been suggested on SELOC.
I dunno, just asking as it has been suggested on SELOC.
What do you mean exactly?
It was implied that as the R brakes are servo assisted that the benefit of increased pedal feel is pretty much lost completely and that the pedal travel is not reduced as much as it would be on an S.
Don't know if this is really the case but it sounds plausible. Considering the hassle of fitting yourself or the cost of having them fitted it would seem to be of little benefit on an R if this is true.
I've got an S2 Exige and am still debating whether to bother or not.
21TonyK said:
RobM77 said:
21TonyK said:
Are the potential benefits of pedal travel negated by the fact that the R has servo brakes?
I dunno, just asking as it has been suggested on SELOC.
I dunno, just asking as it has been suggested on SELOC.
What do you mean exactly?
It was implied that as the R brakes are servo assisted that the benefit of increased pedal feel is pretty much lost completely and that the pedal travel is not reduced as much as it would be on an S.
Don't know if this is really the case but it sounds plausible. Considering the hassle of fitting yourself or the cost of having them fitted it would seem to be of little benefit on an R if this is true.
I've got an S2 Exige and am still debating whether to bother or not.
Ah, you mean fitting the different brake pads I presume? Yes, I was careful to say in my original post that Shangani and I both have 111S Elises without servo brakes. The honest answer is that I don't know if it would help or not, but my best guess is that all the servo does is reduce the effort required to brake, so it probably would help. Given the cost of the pads, it'd be best to ask at an Elise specialist before forking out on them.
RobM77 said:
21TonyK said:
RobM77 said:
21TonyK said:
Are the potential benefits of pedal travel negated by the fact that the R has servo brakes?
I dunno, just asking as it has been suggested on SELOC.
I dunno, just asking as it has been suggested on SELOC.
What do you mean exactly?
It was implied that as the R brakes are servo assisted that the benefit of increased pedal feel is pretty much lost completely and that the pedal travel is not reduced as much as it would be on an S.
Don't know if this is really the case but it sounds plausible. Considering the hassle of fitting yourself or the cost of having them fitted it would seem to be of little benefit on an R if this is true.
I've got an S2 Exige and am still debating whether to bother or not.
Ah, you mean fitting the different brake pads I presume? Yes, I was careful to say in my original post that Shangani and I both have 111S Elises without servo brakes. The honest answer is that I don't know if it would help or not, but my best guess is that all the servo does is reduce the effort required to brake, so it probably would help. Given the cost of the pads, it'd be best to ask at an Elise specialist before forking out on them.
No, not the pads. Done those, got Mintex 1144s, and have tweaked the pedal adjustment. Its the hoses I'm on about. Not sure whether its worth changing to braided lines.
Since my Elise had braided brake lines on when I bought it I can't say how much of a difference it makes on it.
But I installed braided brake lines on my Honda Civic eg6 and it gave a much firmer and responsive 'feel' to the brakes.
My Elise has the best brakes I've experienced so far,a very good and firm 'feel' to them
But I installed braided brake lines on my Honda Civic eg6 and it gave a much firmer and responsive 'feel' to the brakes.
My Elise has the best brakes I've experienced so far,a very good and firm 'feel' to them
21TonyK said:
RobM77 said:
21TonyK said:
RobM77 said:
21TonyK said:
Are the potential benefits of pedal travel negated by the fact that the R has servo brakes?
I dunno, just asking as it has been suggested on SELOC.
I dunno, just asking as it has been suggested on SELOC.
What do you mean exactly?
It was implied that as the R brakes are servo assisted that the benefit of increased pedal feel is pretty much lost completely and that the pedal travel is not reduced as much as it would be on an S.
Don't know if this is really the case but it sounds plausible. Considering the hassle of fitting yourself or the cost of having them fitted it would seem to be of little benefit on an R if this is true.
I've got an S2 Exige and am still debating whether to bother or not.
Ah, you mean fitting the different brake pads I presume? Yes, I was careful to say in my original post that Shangani and I both have 111S Elises without servo brakes. The honest answer is that I don't know if it would help or not, but my best guess is that all the servo does is reduce the effort required to brake, so it probably would help. Given the cost of the pads, it'd be best to ask at an Elise specialist before forking out on them.
No, not the pads. Done those, got Mintex 1144s, and have tweaked the pedal adjustment. Its the hoses I'm on about. Not sure whether its worth changing to braided lines.
Ah, I understand now. You might be right to be honest. My non assisted pedal firmed up about 20% when I had braided hoses fitted. With servo assistance, you might be reaching into the realm of the 'not noticeable'. Somewhere like Plans Motorsport would be best to advise I would have thought.
My 111R has the original pedal box before the revision for the late '05/06 model. There is sod all feel in the brakes. I have put on Alu bellied discs, Pagid pads and braided hoses. While this is a slight improvement (couldnt have been worse) the brakes have a very "binary" feel and there is not alot of travel between ON and off. It does get better as the brakes warm up. Speedyellow has the solution to the heel and toe issue, he has done the above plus had a pad put on the brake pedal. This allows him to heel and toe.
Gooby said:
My 111R has the original pedal box before the revision for the late '05/06 model. There is sod all feel in the brakes. I have put on Alu bellied discs, Pagid pads and braided hoses. While this is a slight improvement (couldnt have been worse) the brakes have a very "binary" feel and there is not alot of travel between ON and off. It does get better as the brakes warm up. Speedyellow has the solution to the heel and toe issue, he has done the above plus had a pad put on the brake pedal. This allows him to heel and toe.
This is what I thought, I think I'm just going to have to get used to it. I may go for one of the H&T pads.
Thanks
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



