HELP - Radiator burst on my S1
Discussion
Driving in Nazeing near Epping Green in Essex on the weekend and temp went through the roof so I pulled over and every drop of coolant dumped out onto the ground !!! I need some idea from any other S1 owners of cost to remove front clam, drop in full stainless steel rad and replace clam....I know it ain't the smallest job in the world but first quote from dealer is £700. Does this sound right to anyone else in London who has had similar or did you manage to find a good deal somewhere you can tell me about??
Any help appreciated
Any help appreciated

If you allow yourself the time and take your time, this job is well within the scope of the amateur mechanic.
The dilemma is that as you have the clam off, you may as well attend to load of other jobs if necessary....replace hose clips, check all hoses and connectors, add or replace driving lights, same with headlamps etc etc.
It really is just a case of unbolting the old, in with the new. The coolant adding and bleeding is about 10 times easier to do with the clam off, so little to worry about.
The dilemma is that as you have the clam off, you may as well attend to load of other jobs if necessary....replace hose clips, check all hoses and connectors, add or replace driving lights, same with headlamps etc etc.
It really is just a case of unbolting the old, in with the new. The coolant adding and bleeding is about 10 times easier to do with the clam off, so little to worry about.
Sorry to hear of your problems.
Same happened to me yesterday - other people on the M40 thought I was on fire as there was so much steam coming out of the front. Fortunately I bought from SGT and am now driving around in an Alfa Romeo whilst they sort it out.
I was quite happy with the idea of DIY. It looks like a new rad is anything from 130 to 300 GBP + VAT.
Same happened to me yesterday - other people on the M40 thought I was on fire as there was so much steam coming out of the front. Fortunately I bought from SGT and am now driving around in an Alfa Romeo whilst they sort it out.
I was quite happy with the idea of DIY. It looks like a new rad is anything from 130 to 300 GBP + VAT.
Proalloy ones get great feedback but in all honesty if you don't want to spend a fortune the all-alloy Eliseparts radiator is fine and only a few quid more than the Lotus one and it doesn't have the plastic ends that are the standard system's weak point. The high-flow systems are designed with engine conversions in mind, particularly the forced-induction systems.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


