Hmmm, how'd you take the targa top off a T350?

[arran]

Sorry maybe a silly question but do you really have to unscrew it?

[V-GOM]

Yep

[jerrytlr]

arran said:

Sorry maybe a silly question but do you really have to unscrew it?

Two wingnuts at the back of the panel - just loosen them enough to swing the cam shaped alloy bits around and then lift the panel out. No tools required, takes about 60seconds per side.



Takes a bit longer to put them back, but not much....



It seems a bit crude but it is quick and easy to do



BTW I have the later type of fixing, if yours is an early T350 they are different and this may not apply!!



Cheers



Jerry

[arran]

Thanks.... crude yes but as you say it works.... thank god it was easy... couldn'thave faced the heat yesterday from london with them on....

[Mr John]

I have the original type of fixings, two clips that latch down.
Two locating lugs towards the centre of the car, and the clips are one on the side and one on the back.
There is no screwing involved.

[M15ley]

where do the panels stored once removed?

[arran]

There's two nice soft pockets to put them in.... These go in the boot and can be secured down with a kind of blind that comes out from behind the seats.