Right, I've got jacking the front up sussed and made some wood ramps so I can get my trolley jack under the bodywork. Has anyone any tips on wheres the best place to position my jack to lift the rear? - there does not seem to be a nice flat cross member unlike the front.
I normally use the wishbones.
Thursday 15th May 2003
Use the large channel section of chassis below the diff.. It has the added benefit of jacking both sides at the same time.
Yep, the U channel with a trolley jack is the best approach. I use a 2 inch block of hardwood to avoid marking it and this gives enough height for both wheels to leave the ground.
Thursday 15th May 2003
Oh yes. The hardwood is a good tip.
Gassing Station | Wedges | Top of Page | What's New | My Stuff
