Discussion
I've just changed the Oil on my '88 350i.
Put in Valvoline Racing 20/50, oil pressure seem pretty good with it, and I know lots of people who recommend either a 20/50 or 10/60 for the rover V8's
The one in the 350i, is 'relatively' unstressed and a 20/50 will help to maintain pressure.
Just be careful when changing the filter, as there is a tendancy for the oil pump to drain down, and thus need priming before you start the engine.
Do a search on the Wedge Forum, as there's plenty of advice on there HTH.
Put in Valvoline Racing 20/50, oil pressure seem pretty good with it, and I know lots of people who recommend either a 20/50 or 10/60 for the rover V8's
The one in the 350i, is 'relatively' unstressed and a 20/50 will help to maintain pressure.
Just be careful when changing the filter, as there is a tendancy for the oil pump to drain down, and thus need priming before you start the engine.
Do a search on the Wedge Forum, as there's plenty of advice on there HTH.
Hi John and welcome to Pistonheads. If you ask the same question on this forum The guys thyre are very knowledgable and helpful click here
BB
BB
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff