Burn Baby Burn
Discussion
Driving along merrily on friday afternoon. Get white van dickhead man up my arse, flashing, beeping his horn, sh*t thinks I, have I cut anyone up, overtaken, pulled out of a junction in front of someone, or else driven like a dickhead at all.
The resounding answer from my little brain was no. So, why the road rage mr van man???????
I looked in my mirror to notice the man beeping while pointing at my back end. Shiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiit
Pulls over, and there are flames licking from under the clam where the exhaust exits. I had noticed smoke at a previous junction and was beginning to think the thing was burning oil due to piston ring buggerd up ness.
Going back 24 hours, I had intended on taking the exhaust off this weekend. Had soaked all nuts in wd40, then put a towel on top of the diffuser to soak up the excess. Silly me forgot to remove said towel before driving. So, here I was, doing a fire dance at the side of the road trying to put out the flaming towel. Wouldnt go out, obviously due to being soaked in oil. I looked a proper gimp, trying to put the towel out on a main road, but trying not to get my trainers too tarnished at the same time.
Anyway, no damage done, anecdotal stuff really. C*nting exhaust still aint off though. Nuts wont shift. Rubbish!!!!!!!
The resounding answer from my little brain was no. So, why the road rage mr van man???????
I looked in my mirror to notice the man beeping while pointing at my back end. Shiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiit
Pulls over, and there are flames licking from under the clam where the exhaust exits. I had noticed smoke at a previous junction and was beginning to think the thing was burning oil due to piston ring buggerd up ness.
Going back 24 hours, I had intended on taking the exhaust off this weekend. Had soaked all nuts in wd40, then put a towel on top of the diffuser to soak up the excess. Silly me forgot to remove said towel before driving. So, here I was, doing a fire dance at the side of the road trying to put out the flaming towel. Wouldnt go out, obviously due to being soaked in oil. I looked a proper gimp, trying to put the towel out on a main road, but trying not to get my trainers too tarnished at the same time.
Anyway, no damage done, anecdotal stuff really. C*nting exhaust still aint off though. Nuts wont shift. Rubbish!!!!!!!
Hi John..... you need to use some penetrating oil spray (a trip to Helfrauds is in order). It is MUCH better than WD40. I had to use some on my last car when I couldn't get a nut to move in the cooling system. 1/2 a day with WD40 didn't do anything, but after 1/2 hour with penetrating oil, the ba$£ard nut was off.... Hope this helps and DEFINATELY worth a try before you go cutting anything.
Cheers, Jon
Cheers, Jon

It could have been worse!!!
http://i102.photobucket.com/albums/m97/YOFFI69/FIR...
http://i102.photobucket.com/albums/m97/YOFFI69/FIR...
Yep - this was a mechanic road testing a customer's car
Dave
http://i102.photobucket.com/albums/m97/YOFFI69/FIR...
http://i102.photobucket.com/albums/m97/YOFFI69/FIR...
Yep - this was a mechanic road testing a customer's car
Dave
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



Just cut them off with a mini grinder , you putting new ones on anyway .