Pagids; RS14's or RS42's...?
Pagids; RS14's or RS42's...?
Author
Discussion

TonyHetherington

Original Poster:

32,091 posts

281 months

Wednesday 30th May 2007
quotequote all
Hello hello everybody!
Right, I'm going through 1144's far too quickly. There's still a lot of pad left on them (half) but I think I cook them and the pad just provides no absolute bite....twice now this has happened so it's definitely the pad (the first time a new set fixed it after going the whole bleeding/changing fluid route).

So...I'm going to invest in some pagids. I see there are two types though....14's and 42's. Which is more preferable? I'll not do any trackdays (maybe 1, but that shouldn't be considered) but I do mostly very hard/fast road driving (which is how I've managed to kill 3 sets of 1144's)....all on my European trip thingies (God they're fun!).

So, which is the more favourable? Are the 14's slightly better at slightly higher temperature?

PS: Anybody want to buy a brand new set front/rear Mintex 1144's?

edp190

336 posts

240 months

Wednesday 30th May 2007
quotequote all
For your usage i would go for the 42's as they are better from cold and dont squeak as much! The 14's are geared more towards the track. HTH cheers Ed

Edited by edp190 on Wednesday 30th May 09:53

ld1racing

8,545 posts

249 months

Wednesday 30th May 2007
quotequote all
Just put the RS14's on mine, no complaints here. Didn't need much bedding in either.

Gruffy

7,212 posts

290 months

Wednesday 30th May 2007
quotequote all
The 42s are a better road pad. You'll struggle to get the 14s up to the temperature required to see the best of them and they'll eat through your discs much quicker too.

TonyHetherington

Original Poster:

32,091 posts

281 months

Wednesday 30th May 2007
quotequote all
Cheers chaps - 42's it is! Looking forward to feeling the difference, actually.

cej

961 posts

253 months

Wednesday 30th May 2007
quotequote all
I have the 42's on my car now and they're great. Combined with the EBC discs it's good stopping power thumbup

But they rattle a lot mad Anyone know how to fix this ? If I touch the brake a little the rattling stops. Seems like it's the grooves in the disc causing this,due to the pads being to lose in the caliper .It's very annoying frown

Edited by cej on Wednesday 30th May 10:08

TonyHetherington

Original Poster:

32,091 posts

281 months

Wednesday 30th May 2007
quotequote all
Don't the pads come with a buffeting strip that stops that rattling?

21TonyK

13,409 posts

240 months

Wednesday 30th May 2007
quotequote all
TonyHetherington said:
Cheers chaps - 42's it is! Looking forward to feeling the difference, actually.
I'd be interesting in hearing your views between the Mintex and the Pagids.

Cuzza

2,042 posts

284 months

Wednesday 30th May 2007
quotequote all
cej said:
But they rattle a lot mad Anyone know how to fix this ?
Double sided foam tape stuck on the side of each pad (top and bottom as they sit in the caliper) with the exposed sticky bit covered in copper grease. Sorted!

Gooby

9,269 posts

265 months

Wednesday 30th May 2007
quotequote all
I have used '42's for about 18 months. They are brilliant.
The "buffers" you get with them are a load of rubbish. I used the original anti-squeal shims and some duck tape! Odd solution but it works well.

The big secret is that when they start to squeal, just go for a good fast drive. Work the squeal out of the little barstewards cool

stew-typeR

8,021 posts

269 months

Wednesday 30th May 2007
quotequote all
RS14 is my pad of choice.

edp190

336 posts

240 months

Wednesday 30th May 2007
quotequote all
Good choice! Some people, especially cars with abs can have problems with 14's but obviously that doesnt apply to you as you have a 111s! cheers Ed

Tina K

22,030 posts

243 months

Wednesday 30th May 2007
quotequote all
My front Mintex 1144s have only lasted six months. No track use, just two Walshy Days and a bit of sharp braking on the road. The rears now need changing, so I shall be swapping the lot for RS42s unless someone can convince me otherwise.

emenel

891 posts

250 months

Wednesday 30th May 2007
quotequote all
I was about to get Mintex 1144's fitted but am now considering the Pagids. Would they be overkill for normal road use on standard discs?

Also, do they significantly shorten the life of the discs due to the harder material?

edp190

336 posts

240 months

Wednesday 30th May 2007
quotequote all
I killed my first set of standard pads in 7k miles. (mix of fast road and track) Then i got 42s and they lasted 11k miles with similar usage. They are infinitely better! I wouldnt say that they are too hard on discs which lasted till 22k miles. I would say the 42s are not overkill for road use only. All IMHO. HTH cheers Ed



Edited by edp190 on Wednesday 30th May 19:38

21TonyK

13,409 posts

240 months

Wednesday 30th May 2007
quotequote all
edp190 said:
I killed my first set of standard pads in 7k miles. (mix of fast road and track) Then i got 42s and they lasted 11k miles with similar usage. They are infinitely better! I wouldnt say that they are too hard on discs and they lasted till 22k miles. I would say the 42s are not overkill for road use only. All IMHO. HTH cheers Ed

Edited by edp190 on Wednesday 30th May 19:36
My concern is about braking from cold? With my mintexs' the first thing I do is ride the brakes for a few seconds before I get to the junction at the end of my drive. That's enough to get them going. Aren't Pagids a bit of a nightmare until properly warmed up?

shangani

3,069 posts

268 months

Wednesday 30th May 2007
quotequote all
RS42's work much better from cold than standard lotus pads. The RS14's need a bit of heat in them.

emenel

891 posts

250 months

Wednesday 30th May 2007
quotequote all
Cheers Ed.

S Works

10,166 posts

281 months

Wednesday 30th May 2007
quotequote all
I'd go for RS14's if you're killing 1144's. I find them find, road and track.

kevin ritson

3,423 posts

258 months

Wednesday 30th May 2007
quotequote all
Interesting....1144s in "not that great" shocker scratchchin