HELP - control box under pass side dash question

[hugepiece]

Been trying to re-route some cables near passenger footwell tonight and unplugged the two cable sets on the control box next to ECU (one with 2 white mutli plugs and a ribbon), then realised both connectors are the same. I dont want to re-connnect and blow the thing. Does anyone know how to identify which goes into which socket? one is level with the ribbon and the other is slightly offset. help!

[hugepiece]

Did another search and found a pic this time, sorry folks

[Mr Freefall]

hugepiece said:

Been trying to re-route some cables near passenger footwell tonight and unplugged the two cable sets on the control box next to ECU (one with 2 white mutli plugs and a ribbon), then realised both connectors are the same. I dont want to re-connnect and blow the thing. Does anyone know how to identify which goes into which socket? one is level with the ribbon and the other is slightly offset. help!

If this is this is the heater control box, you will have to trial and error on the white connectors. One way will work, one wont. If your heater fail's to work, then try the other way.

Good luck

Mr F

[Byker28i]

I've a bunch of pics I took of mine here:

http://www.pbase.com/byker28i/tvr&page=2

[hugepiece]

thanks fellas, I was scared of blowing the thing up as I know how sensitive these electrics can be. all working fine now! cheers